http://tmpinstrument.com/ 2026-03-13 07:04:19 +0000 vi hourly 1 Website Module điều khiển đầu đốt dầu và khí 70D41 và 70D40 hãng Fireye http://tmpinstrument.com/module-dieu-khien-dau-dot-dau-va-khi-70d41-va-70d40-hang-fireye 2020-01-16 11:25:22 http://tmpinstrument.com/module-dieu-khien-dau-dot-dau-va-khi-70d41-va-70d40-hang-fireye


 

Readmore

D-Series 70D40 and 70D41 Burner Control

SOLID STATE Burner Management Controls SERIES D40-41

Fireye® Series D10, D20 and D30 burner management controls provide ignition and main flame failure protection for automatically ignited oil and gas burners.

Plug-in Amplifier Modules permit the selection of ultraviolet, repetitive self-check ultra-violet, AUTOCHECK infrared, or rectification methods of flame detection. The control system includes a safe start check, effective on each start. If the flame signal (real or simulated) is detected, the unit cannot be started.

Module điều khiển đầu đốt dầu và khí 70D41 và 70D40 hãng Fireye

ORDERING INFORMATION

  D SERIES C SERIES
OBSOLETE PART NUMBER COMPONENTS  
D40-5030 Control 70D40 - Amplifier 72D1R1 Type 26DF4 - Model 5030
D41-5131 Control 70D41 - Amplifier 72D1R1T Type 26DF4 - Model 5131
D40-5060 Control 70D40 - Amplifier 72DUV1 Type 25DU4 - Model 5060
D41-5161 Control 70D41 - Amplifier 72DUV1T Type 25DU4 - Model 5161
D40-5050 Control 70D40 - Amplifier 72DRT1 —
D41-5151 Control 70D41 - Amplifier 72DRT1T —

DESCRIPTION OF FIREYE SERIES D40-41 COMPONENTS

Control Chassis and Cover Amplifier Flame Scanner
Use with
70D40 (120VAC) 50-60 Hz
or
70D41 (230VAC) 50/60 Hz		 Rectification
72DRT1          2-4 sec. FFRT
72DRT1T       1 sec. FFRT		 69ND1-1000K4 1/2" mount 12" (300mm)  flame rod.
69ND1-1000K6  1/2" mount 18" (450mm)  flame rod.
69ND1-1000K8  1/2" mount 24" (600mm)  flame rod.
Infrared (IR) “Autocheck”
72D1R1         2-4 sec. FFRT
72D1R1T       1 sec. FFRT
*72D1R3          2-4 Sec. FFRT
*72D1R3T       1 Sec. FFRT
* For specific applications see note below.		 48PT2-1003      1/2  straight mount 96" (2400mm) cable.
48PT2-9003       1/2  angle mount 96" (2400mm) cable.
1/ "  straight mount 48" (1200mm) cable.
48PT2-1007         2
48PT2-9007       1/2"  angle mount 48" (1200mm) cable.
Ultraviolet (UV)
72DUV1         2-4 sec. FFRT
72DUV1T      1 sec. FFRT		 UV8A                1/2"  angle mount 72" (1800mm) wire (no cable).
UV1A3               1/2"  straight mount 36" (900mm) cable. UV1A6               1/2"  straight mount 72" (1800mm) cable. UV2                   3/8"  straight mount 36" (900mm) cable.
UV90-3, -6, -9      90º side opening, 36" (900mm),  72" (1800mm), or 108" (2700mm) cable.
45UV3-1050     3/4"  straight mount cast aluminum housing,
72" (1800mm) wire (no cable).
70D40 Only 72DUVS4   Repetitive Self-Check
2-4 sec. FFRT
72DUVS1T    Repetitive Self-Check
1 sec. FFRT		 45UV5-1009     1" NPT mount 72" (1800mm)  wire (no cable),
120VAC shutter. or                       or
45UV5-1008     1" BSP mount 72" (1800mm) wire (no cable),120VAC shutter.
70D41 Only 72DUVS1T or 72DUVS4 45UV5-1007      1" BSP mount 72" (1800mm)  wire, no cable.
230VAC shutter
Wiring Base 60-1386-2     Standard base for surface mounting
60-1466-2     Open base for cabinet mounting
NOTE: Infrared  “AUTOCHECK” amplifier  modules  72D1R3,  72D1R3T,  and 72D1R3T may be used for burner applications firing special fuel such as sawdust, sander dust, low BTU gas. The 72D1R3 type amplifiers are not to be used on any liquid fuel fired burner as it may result in malfunction causing damage to property and/or injury to personnel.

The post Module điều khiển đầu đốt dầu và khí 70D41 và 70D40 hãng Fireye appeared first on tmpinstrument.com.

]]> D-Series 70D40 and 70D41 Burner Control

SOLID STATE Burner Management Controls SERIES D40-41

Fireye® Series D10, D20 and D30 burner management controls provide ignition and main flame failure protection for automatically ignited oil and gas burners.

Plug-in Amplifier Modules permit the selection of ultraviolet, repetitive self-check ultra-violet, AUTOCHECK infrared, or rectification methods of flame detection. The control system includes a safe start check, effective on each start. If the flame signal (real or simulated) is detected, the unit cannot be started.

Module điều khiển đầu đốt dầu và khí 70D41 và 70D40 hãng Fireye

ORDERING INFORMATION

  D SERIES C SERIES
OBSOLETE PART NUMBER COMPONENTS  
D40-5030 Control 70D40 - Amplifier 72D1R1 Type 26DF4 - Model 5030
D41-5131 Control 70D41 - Amplifier 72D1R1T Type 26DF4 - Model 5131
D40-5060 Control 70D40 - Amplifier 72DUV1 Type 25DU4 - Model 5060
D41-5161 Control 70D41 - Amplifier 72DUV1T Type 25DU4 - Model 5161
D40-5050 Control 70D40 - Amplifier 72DRT1 —
D41-5151 Control 70D41 - Amplifier 72DRT1T —

DESCRIPTION OF FIREYE SERIES D40-41 COMPONENTS

Control Chassis and Cover Amplifier Flame Scanner
Use with
70D40 (120VAC) 50-60 Hz
or
70D41 (230VAC) 50/60 Hz		 Rectification
72DRT1          2-4 sec. FFRT
72DRT1T       1 sec. FFRT		 69ND1-1000K4 1/2" mount 12" (300mm)  flame rod.
69ND1-1000K6  1/2" mount 18" (450mm)  flame rod.
69ND1-1000K8  1/2" mount 24" (600mm)  flame rod.
Infrared (IR) “Autocheck”
72D1R1         2-4 sec. FFRT
72D1R1T       1 sec. FFRT
*72D1R3          2-4 Sec. FFRT
*72D1R3T       1 Sec. FFRT
* For specific applications see note below.		 48PT2-1003      1/2  straight mount 96" (2400mm) cable.
48PT2-9003       1/2  angle mount 96" (2400mm) cable.
1/ "  straight mount 48" (1200mm) cable.
48PT2-1007         2
48PT2-9007       1/2"  angle mount 48" (1200mm) cable.
Ultraviolet (UV)
72DUV1         2-4 sec. FFRT
72DUV1T      1 sec. FFRT		 UV8A                1/2"  angle mount 72" (1800mm) wire (no cable).
UV1A3               1/2"  straight mount 36" (900mm) cable. UV1A6               1/2"  straight mount 72" (1800mm) cable. UV2                   3/8"  straight mount 36" (900mm) cable.
UV90-3, -6, -9      90º side opening, 36" (900mm),  72" (1800mm), or 108" (2700mm) cable.
45UV3-1050     3/4"  straight mount cast aluminum housing,
72" (1800mm) wire (no cable).
70D40 Only 72DUVS4   Repetitive Self-Check
2-4 sec. FFRT
72DUVS1T    Repetitive Self-Check
1 sec. FFRT		 45UV5-1009     1" NPT mount 72" (1800mm)  wire (no cable),
120VAC shutter. or                       or
45UV5-1008     1" BSP mount 72" (1800mm) wire (no cable),120VAC shutter.
70D41 Only 72DUVS1T or 72DUVS4 45UV5-1007      1" BSP mount 72" (1800mm)  wire, no cable.
230VAC shutter
Wiring Base 60-1386-2     Standard base for surface mounting
60-1466-2     Open base for cabinet mounting
NOTE: Infrared  “AUTOCHECK” amplifier  modules  72D1R3,  72D1R3T,  and 72D1R3T may be used for burner applications firing special fuel such as sawdust, sander dust, low BTU gas. The 72D1R3 type amplifiers are not to be used on any liquid fuel fired burner as it may result in malfunction causing damage to property and/or injury to personnel.
]]> Flame Scanners 48PT2 Fireye - Đại lý phân phối thiết bị Fireye tại Việt Nam http://tmpinstrument.com/flame-scanners-48pt2-fireye-dai-ly-phan-phoi-thiet-bi-fireye-tai-viet-nam 2020-01-16 10:50:03 http://tmpinstrument.com/flame-scanners-48pt2-fireye-dai-ly-phan-phoi-thiet-bi-fireye-tai-viet-nam Flame Scanners 48PT2 Fireye - Đại lý phân phối thiết bị Fireye tại Việt Nam Readmore

Đại lý phân phối Fireye tại Việt Nam

FLAME SCANNERS FIREYE

Model: 48PT2

The 48PT2 lead sulfide infrared scanner contains a low impedance detector and is designed to detect low flicker frequency IR signals from gas and oil flames. It is designed for use on D-Series, FlameMonitor, FlameWorx, MicroM and Burnerlogix controls.

Flame Scanners 48PT2 Fireye - Đại lý phân phối thiết bị Fireye tại Việt Nam

Specifications

  • Operating Voltage: 7-15 VDC
  • Operating Temperature Limits: -40° to 140°F (-40° to 60°C)
  • Features an 8 ft flexible conduit
  • Compatible with Fireye DSeries, Flame-Monitor, FlameWorx, and MicroM burner control systems
PART NUMBER DESCRIPTION USE WITH

48PT2-1003

48PT2-1007

48PT2-9003

48PT2-9007

48PT2-CEX

IR Straight Head 8 feet (2440mm) leads

IR Straight Head 4 feet (1220mm) Leads

IR 90 deg. Head 8 ft. (2440mm) Leads

IR 90 deg. Head 4 ft. (1220mm) Leads

IR Straight Head, 1/2” NPT inlet

 C & D Series, MicroM, FLAME-MONITOR, BurnerLogix

The post Flame Scanners 48PT2 Fireye - Đại lý phân phối thiết bị Fireye tại Việt Nam appeared first on tmpinstrument.com.

]]> Đại lý phân phối Fireye tại Việt Nam

FLAME SCANNERS FIREYE

Model: 48PT2

The 48PT2 lead sulfide infrared scanner contains a low impedance detector and is designed to detect low flicker frequency IR signals from gas and oil flames. It is designed for use on D-Series, FlameMonitor, FlameWorx, MicroM and Burnerlogix controls.

Flame Scanners 48PT2 Fireye - Đại lý phân phối thiết bị Fireye tại Việt Nam

Specifications

  • Operating Voltage: 7-15 VDC
  • Operating Temperature Limits: -40° to 140°F (-40° to 60°C)
  • Features an 8 ft flexible conduit
  • Compatible with Fireye DSeries, Flame-Monitor, FlameWorx, and MicroM burner control systems
PART NUMBER DESCRIPTION USE WITH

48PT2-1003

48PT2-1007

48PT2-9003

48PT2-9007

48PT2-CEX

IR Straight Head 8 feet (2440mm) leads

IR Straight Head 4 feet (1220mm) Leads

IR 90 deg. Head 8 ft. (2440mm) Leads

IR 90 deg. Head 4 ft. (1220mm) Leads

IR Straight Head, 1/2” NPT inlet

 C & D Series, MicroM, FLAME-MONITOR, BurnerLogix
]]>