Industrial Servo Valves Power Guide PG300 - PG500 - PG800 Nireco

tmpinstrument — 2020-02-17 21:20:55

Industrial Servo Valves Power Guide PG300 - PG500 - PG800 Nireco Readmore

Đại lý Nireco tại Việt Nam

Process Control Systems

Edge Position Control Systems

Power Guide PG300, PG500, PG800AA

Overview

The Power Guide servo valve is back, lighter, and with even stronger erformance than ever before.
Compatible with older models through a specialized adapter, and as easy to use as ever, Power Guide servo valves combine high performance and convenience with the toughness to work in dirty environments, changing the face of industrial servo valves.

Feature

Compact

Smaller and lighter, the unit has only one fifth the volume of previous models.

High responsivity

45Hz/-3dB
Power Guide servo valves feature high responsivity and high gain, with low hysteresis, achieving high levels of precision in EPC and CPC.

Specifications

Model		PG800	PG500	PG300
Dimensions		114 x 224 x 70
Rated pressure		2 - 14MPa
Rated flow L/min		80	50	25
Return-side pressure resistance	Internal drain	1MPa
Return-side pressure resistance	External drain	3MPa
Internal leakage L/min		4.5	3.5	3
Response of frequency		45Hz (-3dB)
Hysteresis		1%
Ambient operating temperature		0 - 50°C
Hydraulic oil temperature		10 - 60°C 《10 - 50°C》
Hydraulic oil viscosity range		20 - 80 mm/S (cSt)
Hydraulic oil contamination grade		NAS grade 11/Mass grade 103
Line filter		10μm(β10≧200)
Moving Coil resistance value		18.5Ω 《20》
Rated current		±200mA DC
Recommended dither signal (100Hz)		2Vp-p
Fixed orifice		φ0.4mm 《φ0.45mm》
Hydraulic oil		Mineral oil (water glycol under development) Fatty acid ester, mineral oil, phosphate ester and water-glycol types

The post Industrial Servo Valves Power Guide PG300 - PG500 - PG800 Nireco appeared first on tmpinstrument.com.

Máy tự động điều chỉnh canh biên LCD Nireco - Đại lý phân phối Nireco tại Việt Nam

tmpinstrument — 2019-10-18 22:12:05

Công ty Tăng Minh Phát hiện đang là Đại lý hãng Nireco tại Việt Nam. Chúng tôi chuyên cung cấp các thiết bị và giải pháp hãng Nireco như: Hệ thống canh chỉnh biên EPC cho ngành sản xuất tôn thép, sản xuất bao bì và giấy, Hệ thống điều khiển vị trí CPC trong ngành thép, Hệ thống kiểm tra chất lượng in trong ngành in ấn, Hệ thống ghi chữ tự động lên phối thép, Hệ thống điều khiển lực căng cho ngành sản suất bao bì và giấy...vvv. Hãy liên hệ với chúng tôi để được tư vấn và báo giá.

LCD series Nireco | Compact Guide Roll Mechanism

Máy tự động điều chỉnh canh biên khi có sự cố

Faster, labor-saving, more user-friendly to meet your needs!

This Compact Guide Roll Mechanism is Nireco' s EPC (Edge Position Control) system that seeks to achieve both ease of use and cost performance that are essential to web conveyors. Nireco sells integrated systems that use the center-pivot approach that puts very little load on the web and integrates the guides, controller and sensors. In response to strong market needs, Nireco will soon begin sales of a new guide roller system that saves time and labor, and is easy to use.

Examples of web travel LCD series Nireco

Feature LCD series Nireco

Simply connect the primary power supply to the system - there's no need for initial adjustment.
With only simple periodic checks, this system can steadily run for a long period (in an optimal working environment).
Optimal for use with low-tension, flexible webs.
The system can be operated via a remote control panel (optional) at a distance of up to 10 meters.
Simple, solid construction at an economical price.

Specifications LCD series Nireco

Power source voltage	24V DC
Power consumption	100 W (24V DC, 4A max)
Roll surface length	250 to 550mm (50mm increments), maximum length: 610mm
Roll diameter	φ 50 mm (standard) or φ 80 mm
Tension	200 N
Line speed	max.250 m/min
Adjustment	±10 mm
Mass	10 to 15 kg

The post Máy tự động điều chỉnh canh biên LCD Nireco - Đại lý phân phối Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh chỉnh biên dạng PHOTOHEAD PH22 Nireco - Đại lý Nireco tại Việt Nam

tmpinstrument — 2019-10-18 21:56:21

PH22 Nireco | PHOTOHEAD

Cảm biến canh chỉnh biên dạng PHOTOHEAD sử dung trong ngành sản xuất bao bì và giấy.

A sensor most suitable for sensitive materials that does not use ultraviolet or infrared as the light source

Easy detection setup eases the burden on the users

The Photohead PH22 is a sensor designed to detect a transparent web or a nonwoven fabric as a detector for EPC. The sensor adopts SPD as the detector element and white LED as the light source to offer a long time, safe operation of meandering detection.

Feature PH22 Nireco

Detects even a slight displacement of web by emitting light with uniform intensity.
Use of SPD enables faster reaction and improves the detection accuracy for high-speed operations.
Detects a 0.1mm displacement of transparent web.
Use of white LED for the light source enables a long time, stable operation and helps to reduce cost.

Specifications PH22 Nireco

Spotlight distance	32mm
Detection field of view	6mm
Light source	White LED
Light source wavelength	Visible Light
Sensitivity	Detect displacement 0.1mm of non-transparent web
Output voltage	0 to 5V DC
Detection element	SPD
Power supply	±15V DC
Ambient temperature	0 to ＋50℃
Response frequrncy	Filter ON 3Hz(PH20A equivalent)
Response frequrncy	Filter OFF 30Hz
Main body material	Cast Aluminum Alloy
Mass	Head: 450g
Mass	Cable: 250g

The post Cảm biến canh chỉnh biên dạng PHOTOHEAD PH22 Nireco - Đại lý Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh biên dạng siêu âm UHW051 Nireco - Đại lý Nireco tại Việt Nam

tmpinstrument — 2019-10-18 21:45:44

UHW051 Nireco | Ultrasonic Autowide Sensor

Cảm biến canh biên dạng siêu âm sử dụng trong ngành sản xuất bao bì và giấy

Overview UHW051 Nireco

Consistently detects changes in the edge position of transparent/thin/reflective webs - over a wide field of view.

The ultrasonic Autowide sensor is able to detect -- over a wide field of view -- the edge of webs that are transparent or are thin films or have other qualities that make them difficult to be detected by optical sensors.
Not only is the ultrasonic Autowide sensor UHW051 resistant to changes in ambient temperature and humidity, this sensor for the detection of meandering web edges has outstanding features, including a function that automatically corrects the level of ultrasonic transmission when the thickness of the detected web changes.
The ultrasonic Autowide sensor UHW051 is a meandering web edge detector that saves time and labor, and is easy to use.

Feature UHW051 Nireco

Even if the detected material changes, the automatic thickness compensation function enables optimal detection
An effective detection field of view of 56 mm
An automatic correction function which minimizes the influence of changes in ambient temperature and humidity
Can detect the edges of thin transparent films (3 μm or greater) over a wide field of view

Specifications UHW051 Nireco

Power supply	15V DC (12 to 18V)
Power consumption	1.5W
Detection field of view	56mm
Linearity	±0.2mm
Detection output	228kHz
Linearity	Within ± 0.2 mm
Ultrasonic frequency	223kHz
Response frequency	43Hz
Applicable material	Plastic film, paper, metal, etc. 3μm or thicker (excluding unwoven cloth)
Using ambient temperature	0 to 50℃
Using ambient humidiy	35 to 85% RH (No dew condensation)
Mass	1.7kg (Body: 1.2kg, 2m cable on body side: 0.5 kg)

The post Cảm biến canh biên dạng siêu âm UHW051 Nireco - Đại lý Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh biên dạng siêu âm UHW280 Nireco - Đại lý Nireco tại Việt Nam

tmpinstrument — 2019-10-18 21:37:10

UHW280 Nireco | Ultrasonic Autowide Sensor

Cảm biến canh biên dạng siêu âm cho ngành sản xuất bao bì và giấy

Overview UHW280 Nireco

Consistently detects changes in the edge position of transparent/thin/reflective webs - over a wide field of view.

The ultrasonic Autowide sensor is able to detect -- over a wide field of view -- the edge of webs that are transparent or are thin films or have other qualities that make them difficult to be detected by optical sensors.
Not only is the ultrasonic Autowide sensor UHW280 resistant to changes in ambient temperature and humidity, this sensor for the detection of meandering web edges has outstanding features, including a function that automatically corrects the level of ultrasonic transmission when the thickness of the detected web changes.
The ultrasonic Autowide sensor UHW280 is a meandering web edge detector that saves time and labor, and is easy to use.

Feature UHW280 Nireco

Even if the detected material changes, the automatic thickness compensation function enables optimal detection
An effective detection field of view of 280 mm
An automatic correction function which minimizes the influence of changes in ambient temperature and humidity
Can detect the edges of thin transparent films (3 μm or greater) over a wide field of view

Specifications UHW280 Nireco

Power supply	15V DC (12 to 18V)
Power consumption	2.0W
Detection field of view	280mm
Detection output	0 to 5 V or 4 to 20 mA, digital communications network CircLink (by SMSC)
Linearity	Within ± 0.2 mm
Ultrasonic emission frequency	223kHz
Frequency response	50Hz
Thickness and types of detectable webs	Plastic film, paper, metal, etc. that has a thickness of 3 μm or greater
Thickness and types of detectable webs	(can not detect non-woven fabric)
Ambient temperature during operation	0 to 50℃
Ambient humidity during operation	35 to 85% RH (no condensation)
Mass	3.5 kg (Detector: 3.0 kg; 2-meter cable: 0.5 kg)

The post Cảm biến canh biên dạng siêu âm UHW280 Nireco - Đại lý Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh biên LH19 Nireco - Đại lý phân phối thiết bị hãng Nireco tại Việt Nam

tmpinstrument — 2019-10-18 21:24:51

LH19 Nireco | LINE FOLLOWER HEAD

Cảm biến canh biên hãng Nireco

Overview LH19 Nireco

Line Follower Head LH19 is a sensor which optically detects meander of register lines or patterns printed on or edges of webs, This meander sensor can be used safely for a long time since it uses SPD as the sensing element and white LED as the light source.

Feature LH19 Nireco

Stronger in sensing of pale blue and green than conventional sensors
With SPD, response speed is increased and sensing accuracy during high-speed operation is improved
Spot diameter can be adjusted easily with the slide control without changing the sensing distance
White LED is used as the light source, which secures long and stable operation and reduces the spare parts cost

Specifications LH19 Nireco

Spotlight distance	10mm
Detection field of view	5 to 3mm (Spot diameter)
Register line width	1.0mm or more
Light source	White LED
Light source wavelength	Visible Light
Output voltage	0 to 5V DC
Detection element	SPD
Power supply	±15V DC
Ambient temperature	0 to ＋50℃
Main body material	Cast Aluminum Alloy
Mass	Head: 400g
Mass	Attached cable: 250g

The post Cảm biến canh biên LH19 Nireco - Đại lý phân phối thiết bị hãng Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh biên dạng điện dung AWC Nireco - Đại lý phân phối hãng Nireco tại Việt Nam

tmpinstrument — 2019-10-18 17:05:46

Tăng Minh Phát hiện đang là Đại lý phân phối chính thức các dòng thiết bị hãng Nireco tại Việt Nam.

AWC Nireco | Capacitance Autowide AWC Series

Cảm biến canh biên dạng điện dung EPC sử dụng trong ngành sản xuất thép hãng Nireco

Overview AWC Nireco

Continuous maintenance-free operation Next-generation CPC Sensor Using Electric Flux Lines

The Capacitance Autowide Sensor AWC is a sensor system that provides continuous, contactless detection of the center position of a strip moving on a line, for use in Center Position Control (CPC). Like our previous sensors, the sensor is maintenance free and can be used continuously with no decline in sensitivity caused by wear over time, giving stable, long-term service. The sensor is now a far easier product to use, offering improvements such as taking away the need for on-field calibration*.
* If there are metal structural elements close to the sensor, some simple adjustment may be required.

Feature AWC Nireco

No field calibration required
Maintenance free
Uninfluenced by light
Insensitive to dirt, scale
Unaffected by passline changes or wavy edges

Specifications AWC Nireco

Ambient temperature	AWC**--*-P (With Pre-amp) (0°C to 50°C)
Ambient temperature	AWC**--*-N (Without Pre-amp) (0°C to 60°C)
Power supply	AC85V to AC264V, 50/60Hz
Sensor accuracy	Within ±5mm
Frequency response	5Hz
Output	Strip diviation ±5V / ±200mm
Output	Alarm Healthy, Roll out, No strip
Weight	63 to 79kg

Oder Code AWC Nireco

Model No.	Strip Width		Demension(mm)					Approx weight(kg)
	Min Width *	Max Width *	A	B	C	D	E
AWC640-3	400	1300	1820	2020	1300	300	500	63
AWC640-4	400	1300	1820	2020	1300	400	600	65
AWC640-5	400	1300	1820	2020	1300	500	700	66
AWC790-3	400	1600	2120	2320	1600	300	500	67
AWC790-4	400	1600	2120	2320	1600	400	600	69
AWC790-5	400	1600	2120	2320	1600	500	700	70
AWC940-3	400	1900	2420	2620	1900	300	500	72
AWC940-4	400	1900	2420	2620	1900	400	600	73
AWC940-5	400	1900	2420	2620	1900	500	700	75
AWC1090-3	400	2200	2720	2920	2200	300	500	76
AWC1090-4	400	2200	2720	2920	2200	400	600	77
AWC1090-5	400	2200	2720	2920	2200	500	700	79

The post Cảm biến canh biên dạng điện dung AWC Nireco - Đại lý phân phối hãng Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh biên PH30/31 Nireco - Đại lý phân phối Nireco tại Việt Nam

tmpinstrument — 2019-10-18 14:22:24

Tăng Minh Phát hiện đang là Đại lý phân phối các dòng thiết bị hãng Nireco tại Việt Nam.

PH30/31 Nireco | PHOTOHEAD

Cảm biến canh và chỉnh biên Nireco

Overview PH30/31 Nireco

The Photohead is the sensor of an EPC (Edge Position Control) system. It uses optical means to detect the edge of a strip (web).
The sensor signal is transmitted to an amplifier, and the amplified output signal is forwarded to a hydraulic jet pipe type controller or a servo valve, controlling the strip edge, so that it remains at the determined position.
If the operating environment of the Photohead is exposed to airborne dust, or if there is the risk that oil or water droplets etc. could fall onto the Photohead projector lens, use a sensor with the air purge specification.

Feature PH30/31 Nireco

The Photohead utilizes parallel light flux and detects the edge position of a strip (web) electrically.

Specifications PH30/31 Nireco

Power supply	Adjust the voltage supplied from the amplifier to:
	PH30 : 6V DC
	PH31 : 12V DC
Output Voltage	Voltage proportional to variation of light intensity at the silicon light sensor element (mV).
Sensitivity:	Detects positional variations of 0.1mm in a strip (opaque web).
Compressed air consumption for air purge specification	400NL/min (at 0.05MPa)
Allowable back pressure	0.05MPa
Paint color	Silver
Ambient temperature	-10 to +60℃
Range of measurement	20mm
Body material	Aluminum alloy castion
Light source:	12V tungsten bulb
Mass	PH30 : 3kg
	PH31 :
	MODEL	V	W	X	Y	Z	MASS(kg)
	PH31-3	300	200	270	540	554	31
	PH31-4	400	200	320	640	654	33
	PH31-5	500	200	370	740	754	36
	PH31-6	600	200	420	840	854	38
	PH31-7	700	400	470	940	954	40
	PH31-8	800	400	520	1040	1054	42
	PH31-9	900	400	570	1140	1154	44

The post Cảm biến canh biên PH30/31 Nireco - Đại lý phân phối Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến siêu âm UH01 Nireco - Đại lý phân phối thiết bị Nireco tại Việt Nam

tmpinstrument — 2019-10-18 11:37:00

Cảm biến siêu âm UH01 Nireco - Đại lý phân phối thiết bị Nireco tại Việt Nam Readmore

UH01 Nireco | ULTRASONIC SENSOR

Cảm biến siêu âm Nireco

Overview

The Ultrasonic Sensor UH01 / UH01A is designed especially to detect transparent film and photosensitive material in EPC(Edge Position Control)system.

It can detect the edge of a web with high accuracy, not affected by irregularities in the coating near the edge of transparent film and printed patterns, which is conventionally impossible by optical sensors. Combined with Nireco,s controller, an electrical EPC system and electro-hydraulic EPC system can be constructed. The UH01A is a version of our UH01 ultrasonic sensor with a longer internal length(the distance from the sensor center position to the inner side of the casing). Internal lengths of 200mm, 300mm, 400mm and 500mm are available. The internal length of the UH01 is 60mm (fixed).

Specifications

UH01	UH01A	UH01S	UH01SA
Sensor gap	48mm
Effective detection length	8mm
Frequency response	200Hz
Sensor output	Hi mode	When fully closed 0V,
	When fully closed 0V, When fully opened +5V DC	When fully opened +300mV DC
	Lo mode
	When fully closed 0mV, When fully opened +300mV DC
	Resistance load of at least 2kΩ
Power supply	DC＋15V(100mA)	DC +7 to +12V(70mA)
	DC－15V(50mA)
Ambient humidity	35 to 85%RH (no condensation)
Ambient mperature	0 to +50℃
Mass	0.36kg

The post Cảm biến siêu âm UH01 Nireco - Đại lý phân phối thiết bị Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh chỉnh biên bằng tia hồng ngoại LH500 Nireco - Đại lý Nireco tại Việt Nam

tmpinstrument — 2019-10-18 11:13:21

Tăng Minh Phát hiện đang là Đại lý phân phối các dòng thiết bị hãng Nireco tại Việt Nam.

LH500 Nireco | LINE FOLLOWER HEAD

Cảm biến chỉnh biên dạng tia hồng ngoại Nireca

Overview LH500 Nireco

Line Follower Head LH500 is a sensor that optically detects register lines or patterns printed on a web and, in combination with a controller (*1), can be used to form an EPC (Edge Position Control) and LFC (Line Follower Control) system.

Line Follower Head LH500 stores detected lines as image information, which it uses to perform pattern matching and comparison operations on image information during operation. With this new system, even if register lines and printing accessories are mixed, the stored lines are always tracked.

*1 Liteguide controller AE1000/AE900L, Web Guide amplifier EH321A

Feature LH500 Nireco

Printed lines stored as image information

The new system is highly effective and keeps track of stored line information, even if register lines and printing accessories are mixed.

Automatic optimization of illuminant color and light volume completed simply by pressing the search button

The sensor has an automatic light adjustment function which can be used also for highly reflective material, such as aluminum foil and copper foil.

Central positioning simple with laser pointer

The device is equipped with a laser pointer, improving visibility of control position.

LED bar makes detection status easy to see

The detected object and detection status can be seen at a glance. Use the search button to toggle between operating mode (deviation display) and search mode (pattern display).

LH500 operating procedures

LH500 Names of parts

Application LH500 Nireco

This is an example of using a combination of LH500 and a Liteguide controller with a slitter machine. The register lines or patterns printed on a web are detected using LH500. Then, so that the line always passes through the reference position, the unwinding reel shifts in the opposite direction from the deviation to cancel out irregularity, stretching, shrinking, uneven thickness, etc., of the web, enabling high accuracy slitting.

Specifications LH500 Nireco

Spotlight distance	With diffuser plate: 1 mm
	(from web surface to diffuser plate surface)
	No diffuser plate: 15 mm
	(from web surface to main unit surface)
Detection range	7 mm (with reference to memory pattern position)
Pattern memory width	3 mm (main unit center)
Light source	Blue and red high luminance LED
Output	1) Position signal (voltage output):	0.7 to 4.3 V DC (High) 0.07 to 0.43 V DC (Low)
	2) Actuator lock signal:	Open collector output 30V, 0.1 A or less ON conditions: pattern errors or outside of pattern field of view, in search mode
Detection element	CCD linear image sensor
Pixel resolution	14 µm
Power supply	+15V DC, 250 mA / -15 V DC, 30 mA
Ambient temperature	0 to +50 ºC (no condensation)
Laser	Class 2 (IEC), ON/OFF switch(for laser pointer)
Body material	AC4C
Outer dimensions	108 (H) × 58 (W) × 50 (D) mm (projected part is not included)
Mass	Main unit: 0.5 kg Screw guider: 0.5 kg
Cables	LH500 cable (optional) Model: MD0002640-70
	Conversion cable (optional) Model: MD0002640-80

The post Cảm biến canh chỉnh biên bằng tia hồng ngoại LH500 Nireco - Đại lý Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến canh chỉnh biên dạng siêu âm UHW500/700 Nireco - Đại lý Nireco tại Việt Nam

tmpinstrument — 2019-10-18 10:39:09

Tăng Minh Phát hiện đang là Đại lý phân phối các dòng thiết bị hãng Nireco tại Việt Nam.

UHW500/700 Nireco | Ultrasonic Autowide Sensor

Cảm biến canh chỉnh biên dạng siêu âm Nireco

Overview UHW500/700 Nireco

Consistently detects changes in the edge position of transparent/thin/reflective webs - over a wide field of view.　

Not only is the Ultrasonic Autowide Sensor UHW resistant to changes in ambient temperature and humidity, this sensor for the detection of meandering web edges has outstanding features, including a function that automatically corrects the level of ultrasonic transmission when the thickness of the detected web changes. The Ultrasonic Autowide Sensor UHW is a meandering web edge detector that saves time and labor, and is easy to use.

Feature UHW500/700 Nireco

Even if the detected material changes, the automatic thickness compensation function enables optimal detection
In addition to analog detection output, the UHW500 and UHW700 use CircLink, a digital communications network that is unaffected by the width of the detection field of view.
An automatic correction function which minimizes the influence of changes in ambient temperature and humidity
Can detect the edges of thin transparent films (3 μm or greater) over a wide field of view

Specifications UHW500/700 Nireco

Model	UHW500	UHW700
Power supply	15V DC (12 to 18V)
Power consumption	3.0W	3.5W
Detection field of view	500mm	700mm
Detection output	0 to 5 V or 4 to 20 mA, digital communications network CircLink (by SMSC)
Linearity	Within ± 0.2 mm
Ultrasonic emission frequency	223kHz
Frequency response	50Hz
Thickness and types of detectable webs	Plastic film, paper, metal, etc. that has a thickness of 3 μm or greater
	(can not detect non-woven fabric)
Ambient temperature during operation	0 to 50℃
Ambient humidity during operation	35 to 85% RH (no condensation)
Mass	6kg (Detector: 5.5 kg; 2-meter cable: 0.5 kg)	7kg (Detector: 6.5 kg; 2-meter cable: 0.5 kg)

The post Cảm biến canh chỉnh biên dạng siêu âm UHW500/700 Nireco - Đại lý Nireco tại Việt Nam appeared first on tmpinstrument.com.