Cảm biến lực căng Model MB Nireco - MB Tension Sensor Nireco

tmpinstrument — 2020-06-27 11:31:17

Cảm biến lực căng Model MB Nireco - MB Tension Sensor Nireco Readmore

Cảm biến lực căng của màng trên trục cuộn

MB Tension Sensor Nireco

Cảm biến lực căng MB được thiết kế để sử dụng với các bộ điều khiển lực căng hoặc máy đo độ căng.

Ưu điểm:

Cài đặt dễ dàng
Có nhiều lựa chọn tùy theo thang đo
Chống quá tải

Thông số kỹ thuật

Model	MB05B	MB05A	MB11B	MB11A	MB25B	MB25A	MB33B	MB33A	MB41
Rated tension (N)	(50)100	200	(50)100	200	500	1000	(2000) 3000	5000	10000
Roll displacement (μm/N)	2.38	1.19	2.63	1.30	0.44	0.22	0.071	0.045	0.023
Allowable roll weight (kg)	10	20	10	20	50	100	300	350	700
Allowable overload (N)	Ten times rated load
Unit weight (kg)	1.5		0.8		3.4		16.1		24
Tension resultant direction	Forward or reverse possible						Forward only (reverse impossible)
Mounting angle	Any desired angle
Supply voltage	DC +6V
Ambient temperature	-10 to +60℃
Applicable bearings	-

The post Cảm biến lực căng Model MB Nireco - MB Tension Sensor Nireco appeared first on tmpinstrument.com.

Industrial Servo Valves Power Guide PG300 - PG500 - PG800 Nireco

tmpinstrument — 2020-02-17 21:20:55

Industrial Servo Valves Power Guide PG300 - PG500 - PG800 Nireco Readmore

Đại lý Nireco tại Việt Nam

Process Control Systems

The Power Guide servo valve is back, lighter, and with even stronger erformance than ever before.
Compatible with older models through a specialized adapter, and as easy to use as ever, Power Guide servo valves combine high performance and convenience with the toughness to work in dirty environments, changing the face of industrial servo valves.

Feature

Compact

Smaller and lighter, the unit has only one fifth the volume of previous models.

High responsivity

45Hz/-3dB
Power Guide servo valves feature high responsivity and high gain, with low hysteresis, achieving high levels of precision in EPC and CPC.

Specifications

Model		PG800	PG500	PG300
Dimensions		114 x 224 x 70
Rated pressure		2 - 14MPa
Rated flow L/min		80	50	25
Return-side pressure resistance	Internal drain	1MPa
Return-side pressure resistance	External drain	3MPa
Internal leakage L/min		4.5	3.5	3
Response of frequency		45Hz (-3dB)
Hysteresis		1%
Ambient operating temperature		0 - 50°C
Hydraulic oil temperature		10 - 60°C 《10 - 50°C》
Hydraulic oil viscosity range		20 - 80 mm/S (cSt)
Hydraulic oil contamination grade		NAS grade 11/Mass grade 103
Line filter		10μm(β10≧200)
Moving Coil resistance value		18.5Ω 《20》
Rated current		±200mA DC
Recommended dither signal (100Hz)		2Vp-p
Fixed orifice		φ0.4mm 《φ0.45mm》
Hydraulic oil		Mineral oil (water glycol under development) Fatty acid ester, mineral oil, phosphate ester and water-glycol types

The post Industrial Servo Valves Power Guide PG300 - PG500 - PG800 Nireco appeared first on tmpinstrument.com.

Đồng hồ hiển thị lực căng TM340 Nireco - Tension Meter - Đại lý phân phối Nireco tại Việt Nam

tmpinstrument — 2019-10-21 15:30:40

Công ty Tăng Minh Phát hiện đang là Đại lý hãng Nireco tại Việt Nam. Chúng tôi chuyên cung cấp các thiết bị và giải pháp hãng Nireco như: Hệ thống canh chỉnh biên EPC cho ngành sản xuất tôn thép, sản xuất bao bì và giấy, Hệ thống điều khiển vị trí CPC trong ngành thép, Hệ thống kiểm tra chất lượng in trong ngành in ấn, Hệ thống ghi chữ tự động lên phối thép, Hệ thống điều khiển lực căng cho ngành sản suất bao bì và giấy...vvv. Hãy liên hệ với chúng tôi để được tư vấn và báo giá.

TM340 Nireco | Tension Meter

Đồng hồ hiển thị lực căng Nireco

Easy tension settings that can be used immediately

Operation status can be known in real timedue to additional communication function

Our new TM340 tension meter is compatible with Nireco's entire line-up of tension sensors (MB, MG, MC, CD, MJ, CJ, TSA, Intrinsically safe TSA ) and displays their tension readings.
The display range is from 0 to 10 kN (1,000 x 10 N). The tension signal output (0 to 10 V (0 to 5 V), or 4 to 20 mA) can be output to a sequencer, indicator, recorder or other device. By using the new communications function (RS485), the tension meter can be linked to a PC or other receiver, so that the operating state of the equipment can be monitored remotely.

The Tension Meter TM340 quantitatively measures the tension of a running web in manufacturing and processing lines of webs such as film, textile and rubber.
Nireco tension sensors that have good accuracy and responsiveness are used. These sensors electronically measure the tiny changes that vary in proportion to the web tension. The TM340 tension meter then adds and amplifies the sensor signals and indicates the tension.

Feature TM340 Nireco

Enhanced operability through digital processing
When initializing, various parameters can be set via a dialogue system.
Auto-zero control function
Zeroing the sensor can be done at the touch of a button.
Correction functions
Auto-zero, auto-span and other adjustment functions can easily be made.
Communication function
The TM340's communication function (RS-485) enables connection to a PC to allow remote monitoring.

Specifications TM340 Nireco

Power source voltage	TM340‐DC : DC24V
Power source voltage	TM340‐AC : AC100 : 240V 50/60Hz
Power consumption	25VA
Ambient temperature operating range	0～＋50℃
Ambient humidity	80% or less (no condensation)
Sensor power supply	+6V、±15V
Input	2 inputs: Any Nireco sensor from the MB, MG, MC, CD, T0, MJ , CJ , TSA series
Output	Voltage output:
	4 outputs: for control, for recording (No. 1, No. 2, Total)
	Current outputs:
	2 outputs.. for control (4 to 20 mA) and for an indicator (1 mA)
Warning output	2 tension upper limits or left and right tension comparisons, lower limit warning outputs
Communications function	RS485 (2 line half duplex, 9600 bps independent protocol) (Transmit the tension value to host)
Installation	Panel mounting
External dimensions	(W)48×(H)96×(D)150
Mass	0.4kg

The post Đồng hồ hiển thị lực căng TM340 Nireco - Tension Meter - Đại lý phân phối Nireco tại Việt Nam appeared first on tmpinstrument.com.

Bộ điều khiển lực căng TC680A/D Nireco - Đại lý phân phối Nireco tại Việt Nam

tmpinstrument — 2019-10-21 15:15:31

TC680A/D Nireco | Tension Controller

Thiết bị điều chỉnh lực căng Nireco

This analog tension controller was designed for easy-to-use, safe control and ease of operation. This intuitive controller, with its simple functionality, is easy for anyone to use.

Feature TC680A/D Nireco

Excellent Responsiveness via Constant Loop Gain Circuit
The control circuit uses Proportional + Integral calculation, providing fast response and high accuracy. Additionally indexed calculation is used to maintain a constant loop gain, regardless of changes in diameter. This maintains high responsiveness without hunting, maintaining appropriate loop gain at all times.

Easy to Use and Operate
The unit can be controlled automatically as long as you have an automatic machine contact. Consequently, the controller is easy for anyone to use, as long as a tension value is set. When stopped, a sequence allows the stopped output value corresponding to the diameter to be obtained.

Tension Display
It is possible to find the total tension, as well as the tension on just one side. Select an analog or digital display to suit your preferences.

Wide Range of Applications
Fits the final control elements of a large number of applications, including air brakes/clutches, air motors, electro-magnetic brakes/clutches, torque motors, and magnetic coupling motors. Select the installation method to suit the location, from panel-mounted, stand-alone, or mounted.

Connection with a wide range of tension sensors
Can be connected to the following wide range of Nireco sensors: MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA sensors

CE Compliant
CE marking compliant product

Specifications

Power voltage		AC100 to 240V 50/60Hz
Power consumption		320VA (Rush current 60A (200V))
Over voltage category		Ⅱ
Current capacity		1.6A（200V）
Mass		5kg
Environment	Ambient temp.	0 to +50℃
	Ambient hum.	35 to 85% RH or less (no condensation)
	Vibration	3.5 mm, 1G, 3 to 150 Hz, 3 directions (1 hour)
	Power noise	2,000 Vp-p, normal mode, common mode 50 nS, 1 uS
	Atmosphere	No liquid water or flammable or corrosive gas, with low dust levels
	Air pollution degree	2
Rated tension		50, 100, 200, 500, 1000, 2000, 3000, 5000, 10000 N (The scale of the rated tension display is changed to show the various tensions.)
Connectable Tension Sensors		MB/MG tension sensor or
Connectable Tension Sensors		MC/CD/MJ/CJ/TSA/Intrinsically safe TSA tension sensor
Output	Control Output	0 to 10V (max.5mA), 4 to 20mA
	Control Output	0 to 24V (max.4A)
	Display Output	0 to 10V (max.1mA), 0 to 1mA
	Recorder Output	0 to 10V (max.1mA)
	External Tension Setting Power	10V (max.5mA)
	Contact Output	No. outputs: 1 (30 V DC; 0.2A)
	Contact Output	Zero tension
Input	Sensor Input	Shared pins
		MB/MG/Intrinsically safe TSA tension sensor(connect to pins 1 to 4 & 17 to 20)
		MC/CD/MJ/CJ/TSA tension sensor(connect to pins 3 to 6 & 19 to 22)
	External Tension Setting Input	0 to 10V, input resistance 20 kΩ
	Contact Input	Auto contact (12 V DC; 10 mA)

The post Bộ điều khiển lực căng TC680A/D Nireco - Đại lý phân phối Nireco tại Việt Nam appeared first on tmpinstrument.com.

Bộ điều khiển lực căng TC920V Nireco - Đại lý phân phối Nireco tại Việt Nam

tmpinstrument — 2019-10-19 23:00:51

TC920V Nireco | Tension Controller

Thiết bị điều chỉnh lực căng Nireco

The TC920V Tension Controller can be used with a wide range of web manufacturing and treatment processes to automatically control the tension of a moving web to a constant value. Digital calculation allows a wider range of functions than previous products, but the controller can still be operated in the intuitive style of an analog device. This controller combines stable and precise tension control with excellent cost performance.

Feature TC920V Nireco

Control knobs for frequently-used operations
Control knobs are used for tension settings and manual settings to give a familiar feel.
Clear display
A four-digit LED display is used for quick and easy checking and an LCD display for more extensive information.
Simple zero and span adjustment on installation
Automatic adjustment functions make adjustment a simple process. Tension control is conducted with the start contact only. The system automatically outputs pre-output on startup, and slack-prevention output on stop.
Excellent responsivity and stability
Proportional and integral action are augmented by our renowned fixed loop gain calculation.
Connection with a wide range of tension sensors
Can be connected to the following wide range of Nireco sensors: MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA sensors
Free choice of actuators
Electromagnetic brakes and clutches, pneumatic brakes and clutches and torque motors can be used.
Compatible with automatic paper splicing
The new/old spindle switching signal produces paper splicing preset output for paper splicing with little variability.
Diameter measurement function
An encoder or other suitable sensor can be connected to measure roll diameter.

Function TC920V Nireco

Loop Gain Correction Circuit Provides Excellent Responsiveness and Stability

Tension Signal Converter
Digitally display the sum or product of the No. 1 and No. 2 tension sensor tensions.
Control Calculator
A control calculator compares the tension signal from the tension display with the target tension, and reduces any variation. Additionally, the ever-popular constant loop-gain control delivers superb control stability and responsiveness, regardless of coil diameter.
Output Amp
When the magnetic brake/clutch on the final control element is used, the power of the control signal is increased, and output at 0 to 24 V (4A). When the air brake/clutch is used, 4 to 20 mA is output to the electro-pneumatic converter. When a torque motor is used, a 0 to 10 V (2mA) voltage signal is output to the motor driver.

Specifications TC920V Nireco

Power supply voltage			100 to 240V AC 50/60Hz
Power consumption			300VA (Entry cuurent 60Atyp (20ms))
Current capacity			1.5A (200V)
Mass			6kg
Environment	Operating ambient temperature		0 to +50°C
	Operating ambient humidity		35 to 85%RH (no condensation)
	Vibration resistance		3.5mm, 1G, 3 to 150Hz, 3 directions (for one hour)
	Power source noise		2kV, normal mode, pulse width of common mode 50 nS,
			1 uS (depends on the noise simulator)
	Operating ambient atmosphere		Place free from water droplets, inflammable gas, corrosive gas, corrosive gas, and dust
Rated tension			10～10000N
Tension sensors that can be connected to the TC920V			MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA tension sensors.
Output	Output for measurement		Tension value voltage output (0 to 10VFS (1 mA or less))
			Current output for tension value meter (0 to 1mA/FS)
	External setting power supply		0 to 10V (1 mA or less), 4 to 20mA (470Ω or less)
			0 to 24V (4A or less)
	Power supply for external setting		Power supply for external setting
	Contact output	Zero tension output	Number of outputs, 3
		Minimum diameter output	(DC30V 0.2A, AC200V 0.2A)
		Automatic control output
Input	Sensor input		•MG tension sensor
			•MB tension sensor
			•MC tension sensor
			•CD tension sensor
			•MJ tension sensor
			•CJ tension sensor
			•TSA tension sensor
	Analog input		•External tension setting	A number of inputs, 2 (0 to 5V, input impedance 100kΩ）
			•External manual tension setting
			•Analog diameter	A number of inputs, 4 (0 to 10V, input impedance 100kΩ）
			(for Taper and Start level)
			•New spindle deameter (for splicer)
			•External start level setting
			•External taper rate
	Contact input		•Automatic	A number of inputs, 8 (12V DC, 12mA)
			•Memory reset
			•Accelerate/decelerate
			•Splice
			•Output on
			•Emergency stop, external automatic
			/ manual or accelerate
			•Diameter calculation reset
			•Diameter calculation hold
	Pulse generator Gate generator	Detection for speed and diameter	12V DC

The post Bộ điều khiển lực căng TC920V Nireco - Đại lý phân phối Nireco tại Việt Nam appeared first on tmpinstrument.com.

Thiết bị chuyển đổi tín hiệu vị trí analog FW80 Nireco - Đại lý phân phối Nireco tại Việt Nam

tmpinstrument — 2019-10-19 22:28:04

FW80 Nireco | Analog Position Transmitter

Thiết bị chuyển đổi tín hiệu vị trí Analog Nireco

Wire Position Sensor

The FW80 analog position transmitter has two versions: a long-stroke type and an ultra-precision type. The position transmitter incorporates a precision potentiometer, and converts the linear motion of an object to be measured into electric resistance proportional to its position. A construction drawing of this device can be found in Fig. 8. A stainless steel wire is wound around a wire drum, which incorporates a spring. The shaft of the drum is connected to the shaft of the potentiometer via the synchro-belt pulley.

Structural diagram FW80 Nireco

A stainless steel wire is wound around a wire drum, which incorporates a spring. The shaft of the drum is connected to the shaft of the potentiometer via the synchro-belt pulley.

Specifications FW80 Nireco

Output	0 to 2000Ω
Response speed	400mm/sec
Wire tension	45N (4.5kgf) max.
Ambient temperature	-20℃ to +80℃ (standard)
Painted color	JIS7.5BG4/1.5
Weight	8.6kg
Detecting length	300	970	3000	5000
Linearity (%)	±0.2	±0.5	±0.5	±0.5
Resolution (%)	Infinitesimal	0.0091	0.052	0.03
Permissible power (W) (at 60℃)	3	3.3	0.8	1.5

The post Thiết bị chuyển đổi tín hiệu vị trí analog FW80 Nireco - Đại lý phân phối Nireco tại Việt Nam appeared first on tmpinstrument.com.

Thiết bị chuyển đổi tín hiệu vị trí Analog FW22 FW31 Nireco - Đại lý Nireco tại Việt Nam

tmpinstrument — 2019-10-19 22:11:53

FW22,FW31 Nireco | Analog Position Transmitter

Thiết bị chuyển đổi tín hiệu vị trí Analog

CONVERTS POSITION, GATE, WIDTH, WEIGHT etc. into ELECTRICAL SIGNALS.

Wire Position Sensor

The Analog Position Transmitter incorporates a precision potentiometer and converts the linear motion of an object to be measured into electric resistance proportional to its position.

Structural diagram FW22,FW31 Nireco

A stainless steel wire is wound around a wire drum which incorporates a spring. The shaft of the drum is connected to the shaft of the potentiometer.

Specifications FW22,FW31 Nireco

Ambient temperature	-20℃ - +60℃ (standard)
Ambient temperature	-20℃ - +80℃ (FW22 high-temp. specs only)
Painted color	JIS7.5BG4/1.5
Installation Location	FW22: Indoors only
	FW31: Flameproof Type
	Explosion-protection type: Flameproof: d2G4
	Certification No.: 22828
Mass	FW22 : 2kg
Mass	FW31 : 4.4kg

Model	Detecting length(mm)	Linearity(%)	Hysterisis(%)	Permissible power (W) (at 60℃)
FW22	270	±0.5 (Note)	0.2	3.3
	840			2
	1405			2.5
FW31	270	±0.5	0.2	3.3
	840			2
	1405			2.5
	270		－	1.5

The post Thiết bị chuyển đổi tín hiệu vị trí Analog FW22 FW31 Nireco - Đại lý Nireco tại Việt Nam appeared first on tmpinstrument.com.

Cảm biến lực căng Model MB Nireco - MB Tension Sensor Nireco

Thông số kỹ thuật

Industrial Servo Valves Power Guide PG300 - PG500 - PG800 Nireco

Overview

Feature

Compact

High responsivity

Specifications

Đồng hồ hiển thị lực căng TM340 Nireco - Tension Meter - Đại lý phân phối Nireco tại Việt Nam

TM340 Nireco | Tension Meter

Đồng hồ hiển thị lực căng Nireco

Feature TM340 Nireco

Specifications TM340 Nireco

Bộ điều khiển lực căng TC680A/D Nireco - Đại lý phân phối Nireco tại Việt Nam

TC680A/D Nireco | Tension Controller

Thiết bị điều chỉnh lực căng Nireco

Feature TC680A/D Nireco

Specifications

Bộ điều khiển lực căng TC920V Nireco - Đại lý phân phối Nireco tại Việt Nam

TC920V Nireco | Tension Controller

Thiết bị điều chỉnh lực căng Nireco

Feature TC920V Nireco

Function TC920V Nireco

Specifications TC920V Nireco

Thiết bị chuyển đổi tín hiệu vị trí analog FW80 Nireco - Đại lý phân phối Nireco tại Việt Nam

FW80 Nireco | Analog Position Transmitter

Thiết bị chuyển đổi tín hiệu vị trí Analog Nireco

Structural diagram FW80 Nireco

Specifications FW80 Nireco

Thiết bị chuyển đổi tín hiệu vị trí Analog FW22 FW31 Nireco - Đại lý Nireco tại Việt Nam

FW22,FW31 Nireco | Analog Position Transmitter

Thiết bị chuyển đổi tín hiệu vị trí Analog

Structural diagram FW22,FW31 Nireco

Specifications FW22,FW31 Nireco