Đại lý phân phối Honeywell tại Việt Nam

Van 3 ngã Honeywell

Model: V5329A

Order Number: V5329A2077

Valve Size: DN65

Order Number: V5329A2085

Valve Size: DN80

Application

These three port mixing valves are used for modulating control of hot or chilled water in heating, ventilation and air conditioning systems and can be operated by electric linear actuators as ML6420/6425, ML7420/7425, M6421/7421.

The post Van 3 ngã V5329A2077 honeywell | 3-WAY FLANGED LINEAR VALVE PN16 appeared first on tmpinstrument.com.

SS4-A2 Flame Detector

Flame Detector Honeywell

Electro-optical digital detectors represent leading edge UV and UV/IR technology.

SS4-A

The SS4-A represents the world’s pre-eminent UV/IR technology for Electro-Optical Flame Detectors with tens of thousands successfully operating in a multitude of installations worldwide. This multi-spectrum detector senses radiant energy in the ultraviolet (UV), visible and Wide Band Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence.

To eliminate common nuisance false alarms that occasionally occur with UV-only, IR-only, Dual IR or Dual Mode UV/IR detectors, the SS4 Flame Detectors’ FireLogic signal processing requires that UV, visible and Wide Band IR radiant energy all be evaluated before declaring a fire. The smart detector utilizes real-time signal processing algorithms that are optimized to alarm on all types of fires, while virtually eliminating the possibility of 
false alarms.

SS4-AS

The SS4-AS processes UV, IR and Visible (VIS) spectral ranges from ruggedized solar-blind UV, “Quantum-Effect” IR and VIS sensors correspondingly. It is optimized for detection of hydrogen, ethanol, methanol and methane (natural gas) fires and like the other detectors in its family, it responds to Type A, B and C flaming fires.

SS4-AUV

The SS4-AUV represents the leading edge technology UV optical flame detectors. This flame detector senses radiant energy in the ultraviolet (UV) spectrum. The radiant emissions of flaming fires will alert the detector to their presence.

Additional Features and Benefits:

SS4-A and SS4-AS Features:

• Multi-Spectrum™: senses ultraviolet, visible and Wide Band Infrared™
• Built-in test for optical “through the lens” testing
• False alarm immunity
• Detects hydrocarbon and non-hydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable detector sensitivity
• Microprocessor based algorithms: FirePic™, Snapshot™ and Tri-Mode Plot™
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification

SS4-AUV Features:

• Senses solar-blink ultraviolet band
• Built-in test for optical “through the lens” testing 
• Utilizes long-life, ruggedized UV sensors
• Detects hydrocarbon and non-hydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable detector sensitivity
• Microcomputer based algorithms: FirePic™, Snapshot™ and UV Plot
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification.

The post Flame Detectors SS4-A2 Honeywell - Đầu báo cháy hãng Honeywell appeared first on tmpinstrument.com.

FLAME DETECTOR HONEYWELL

Model FS20X

Multi-Spectrum Fire and Flame Detector UV/Dual IR/VIS

The FS20X is the latest generation high technology Multi-Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame Detectors. Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a fire and flame detector with a proven UV solar-blind Sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Solar blind 90° field of view and detection range greater than 200 ft.

Features

• Units include real time clock with data logging up to 200 events with historic time and date data
• Optical path and electric self testing
• Power requirement 24 Vdc
• Visual indicators, green is power, red alarm, yellow fault
• Sensitivity Very high (60m), high (45m), medium (30m) and low (15m) – switch selectable
• Analogue output 0 – 20 mA stepped – source or sink user selectable
• Output Relays Alarm, Fault and Fire
• Dual Microprocessors, one handles samples and signal, freeing the other for data, diagnostics and storage
• FirePic Up to 6 pre-fire event data storage
• Two ¾” NPT or 25mm conduit entries
• Uses low power
• RFI and EMI resistance
• Enclosure IP66
• Approvals: FM, cFM, ATEX, IECEx, En54-10 and SIL 2 complaint
• Little Maintenance required

This series replaces SS4-A2, SS4-AS2 and SS2-AM models.

ORDERING INFORMATION

FS20X Flame Detector Dual IR/UV Flame Detector

FS20X-211 Series, standard temp range -40° to 85°C

FS20X-211-21-2  Copper-Free Aluminum Encl. with (2) ¾” NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III
FS20X-211-22-2 Stainless Steel Encl. with (2) ¾”NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III
FS20X-211-23-3 Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1
FS20X-211-24-3 Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1
FS20X-211-21-6 Copper-Free Aluminum Encl. with (2) ¾” NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III. With En54-10 certification
FS20X-211-22-6 Stainless Steel Encl. with (2) ¾”NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III. With En54-10 certification
FS20X-211-23-6 Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1. With En54-10 certification
FS20X-211-24-6 Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1. With En54-10 certification
FS20X-211-23-8 Copper-Free Aluminum Encl. with (2) M25 entries,, CU-TR approval, T5 ( Op. Temp -60° to 75°C )
FS20X-211-24-8 Stainless Steel Encl. with (2) M25 entries, , CU-TR approval, T5 ( Op. Temp -60° to 75°C )

FS20X-211 Kits

FS20X-212-21-2 FS20X-211-21-2 Copper-Free Aluminum Encl. with (2) ¾” NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III with FSXA014 Optional HART Module
FS20X-212-22-2 FS20X-211-22-2 Stainless Steel Encl. with (2) ¾”NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III with FSX-A014 Optional HART Module
FS20X-212-23-3 FS20X-211-23-3 Copper-Free Aluminum Encl. with (2) M25 entries,FM, cFM, ATEX, IECEx for Class I, Zone 1 with FSX-A014 Optional HART Module
FS20X-212-24-3 FS20X-211-24-3 Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 with FSX-A014 Optional HART Module
FS20X-212-23-8 FS20X-211-23-3 Copper-Free Aluminum Encl. with (2) M25 entries, CUTR approval, T5 ( Op. Temp -60° to 75°C ) with FSX-A014 Optional HART Module
FS20X-212-24-8 FS20X-211-24-3 Stainless Steel Encl. with (2) M25 entries, CU-TR approval, T5 ( Op. Temp -60° to 75°C ) with FSX-A014 Optional HART Module

The post FS20X FLAME DETECTOR HONEYWELL - Đầu báo lửa FS20X Honeywell appeared first on tmpinstrument.com.

FLAME DETECTOR HONEYWELL

Model F24X QuadBand

Triple IR Fire and Flame Detector (IR/IR/IR/Visible)

The FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Fire and Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and Visible detection technology, the FS24X is a quantum leap in flame and fire detection. Sophisticated software algorithms and dual microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm
rejection.
110° field of view with a detection range greater than 200 ft.

Features

• Communications choose between RS-485 ModBus & RS-485 FireBus II
• Further communications optional HART-excludes EN54-10 units
• Software interface option, provides graphics, real time data, diagnostics, retrieval of stored information
• Logs, time and date stamped
• Flash memory
• Optical path and electric self testing
• Test lamps available for manual testing
• Power requirement 24 Vdc
• Humidity range: 5 to 98% relative humidity, non-condensing
• 90° field of view temperature range -60° to 85°C, 110° field of view -40° to 85°C
• Visual indicators, green is power, red alarm, yellow fault
• Analogue output 0 – 20 mA stepped – source or sink user selectable
• Output Relays Alarm, Fault and Fire
• Dual Microprocessors, master for digital sampling and signal processing, slave for data acquisition, communications & diagnostics
• FirePic pre-fire event data storage
• Two ¾” NPT or 25mm conduit entries
• Low power consumption
• Largely RFI and EMI immune
• Maintenance required negligible
• Approvals FM, cFM, IECEx, ATEX, CU-TR, EN54-10, Dash 5 and SIL 2 complaint
• Ingress Protection IP66

FS24X-211 Series with 110° field of view, standard temp range -40° to 85°C

FS24X-211-21-1 Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx & ATEX approved
FS24X-211-22-1 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved
FS24X-211-23-1 Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved
FS24X-211-24-1 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved
FS24X-211-23-8 Copper-Free Aluminum Encl., (2) M25 entries. CU-TR approval, T5 ( Op. Temp -60° to 75°C )
FS24X-211-24-8  316 Stainless Steel Encl. (2) M25 entries, CU-TR approval, T5 ( Op. Temp – 60° to 75°C )

FS24X-911 Series with 90° field of view, standard temp range -60° to 85°C

FS24X-911-21-1 Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx & ATEX approved
FS24X-911-22-1 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved
FS24X-911-23-1 Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved
FS24X-911-24-1 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved
FS24X-911-23-8 Copper-Free Aluminum Encl., (2) M25 entries , CU-TR approval, T5 ( Op. Temp -60° to 75°C )
FS24X-911-24-8 316 Stainless Steel Encl. (2) M25 entries , CU-TR approval, T5 ( Op. Temp -60° to 75°C )
FS24X-911-21-6 Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx, ATEX and EN54-10 approved
FS24X-911-22-6 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx, ATEX and EN54-10 approved
FS24X-911-23-6 Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx, ATEX and EN54-10 approved
FS24X-911-24-6 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx, ATEX and EN54- 10 approved
FS24X-911-21-5 Copper-Free Aluminum Encl., (2) ¾”NPT entries FM,dash 5, cFM, IECEx & ATEX approved
FS24X-911-22-5 316 Stainless Steel Encl., (2) ¾” NPT entries FM, dash 5,cFM, IECEx & ATEX approved
FS24X-911-23-5 Copper-Free Aluminum Encl., (2) M25 entries FM,dash 5, cFM, IECEx & ATEX approved
FS24X-911-24-5 316 Stainless Steel Encl. (2) M25 entries FM,dash 5, cFM, IECEx & ATEX  approved

FS24X-211 Kits

FS24X-211-21-1 FS24X-211-21-1 Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-211-22-1 FS24X-211-22-1 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-212-23-1 FS24X-211-23-1 Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-212-24-1 FS24X-211-24-1 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-212-23-8 FS24X-211-23-1 Copper-Free Aluminum Encl., (2) M25 entries , CU-TR approval, T5 (Op. Temp -60° to 75°C ) with FSX-A014R Optional Registered HART Module
FS24X-212-24-8 FS24X-211-24-1 316 Stainless Steel Encl. (2) M25 entries , CU-TR approval, T5 ( Op. Temp -60° to 75°C ) with FSX-A014R Optional Registered HART Module

FS24X-911 Kits

FS24X-911-21-1 FS24X-911-21-1  Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-911-22-1 FS24X-911-22-1 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-912-23-1 FS24X-911-23-1 Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-912-24-1 FS24X-911-24-1 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-912-23-5 FS24X-911-23-1 Copper-Free Aluminum Encl., (2) M25 entries FM, dash 5, cFM, dash 5, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-912-24-5 FS24X-911-24-1  316 Stainless Steel Encl. (2) M25 entries FM, dash 5, cFM, dash 5, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module
FS24X-912-23-8 FS24X-911-23-1 Copper-Free Aluminum Encl., (2) M25 entries , CU-TR approval, T5 ( Op. Temp -60° to 75°C ) with FSX-A014R Optional Registered HART Module
FS24X-912-24-8 FS24X-911-24-1 316 Stainless Steel Encl. (2) M25 entries , CU-TR approval, T5 ( Op. Temp -60° to 75°) with FSX-A014R Optional Registered HART Module

The post FS24X FLAME DETECTOR HONEYWELL - Đầu báo lửa FS24X Honeywell appeared first on tmpinstrument.com.