Đại lý ROMER Fordertechnik tại Việt Nam

CONTROL SYSTEM FOR BRAKES TYPE RCS

Bộ điều khiển phanh type RCS ROMER Fordertechnik

Product description

„RCS“ is an microprocessor controlled monitoring system for brake systems in crane and industrial applications.

RCS serves for the purpose of early defect detection, damages limitation and guarantees a smooth running of the operative workflow.

Possible monitoring functions:

• Run-time monitoring for opening- and closing times
• Oil-temerature in thruster
• Oil-niveau in thruster
• Remaining lift monitoring in the thruster
• Wear monitoring
• Spring fracture monitoring 
• Rotational speed or standstill monitoring at brakes
• Overspeed monitoring
• Monitoring of the drum and disc temperature
• Force measurement in the optical leverage of the brake
• Synchronous monitoring of redundant brake system
• Differences of the basic adjustment after the commissioning

FUNCTIONAL PRINCIPLE

Available in 2 versions: STANDARD and PRO version

RCS-System STANDARD:

• Touch-Display Monochrom
• 12 Digital input
• 4 Analog input
• 6 Relays-output
• Internal bus to extend the in- output
• SD-Memory-Card max. 2 Gbyte

RCS-System PRO:

• Touch-Display  Color
• 12 digital input
• 4 analoge input
• 6 Relays-output
• Internernal bus to extend the input and output
• Ethernet on Board
• Web-Sever
• SD-Memory-card max. 32 Gbyte

OPTIONS

• GPRS/GSM (SIM-card necessary)
• SMS 
• Ethernet-Modul
• Profibus DP-Slave
• E/A-Extension until 4096 E/A at STANDARD version
  (digital and analog)
• I/O-extension until 4096 E/A at PRO version
  (digital and analog)

Further protection monitoring on request:

• Bearing temperature in hoists (gear box, engine)
• Oil temperature monitoring in hoist gear-boxes
• Oil-niveau monitoring in hoist gear-boxes
• Storage pressure monitoring at fail-safe systems

The post Bộ điều khiển phanh type RCS ROMER Fordertechnik | TYPE RCS ROMER Fordertechnik appeared first on tmpinstrument.com.

Đại lý ROMER Fordertechnik tại Việt Nam

CALIPER SAFETY DISC BRAKE TYPE SCFH

Phanh an toàn type SCFH ROMER Fordertechnik

Product description

"Low-speed" brake.
Caliper safety disc brake direct acting at the board disc of a rope drum.
Load crash security and protection ( also reacting in case of gear shaft fracture).

• Direct-acting / Without lever transmission
• Pad forces up to 400 kN per clamp system 
• Clamp varations on one brake disc (e.g: 4 x SCFH-4= 1600 kN pad force)
• High and independent direction of rotation braking torque
• Two identical clamp halves
• Manual adjustment of brake lining wear
• Lifting gap adjustable from 1 mm to 3 mm
• The hydraulic system is completely encapsulated
• Low-wear sintered brake linings as standard
• MADE IN GERMANY, own production

PLEASE NOTE: 
The "Fast-speed" brake (between motor and gear box) operated electro-hydraulical (thruster) should be equipped with the "TURBO control system for thrusters" to guarantee almost simultaneous reaction times of both ("Fast- and Low" speed brakes) brake systems. Enormous impacts into the gear box due to different reaction times can be strongly reduced or can be prevented!

FUNCTIONAL PRINCIPLE

• Braking by spring force
• Lifting by hydraulic cylinder
• Self-acting in case of power failure

OPTION

• Monitoring equipment for brake opened, closed, wear
  (Please indicate 2 limit switches)
• Hand lifting via hand pump on the hydraulic power unit
• Hydraulic power units are suitable for parallel operations of clamps
• Special design for increased or lower ambient temperatures
• Hydraulic system with hardly inflammable hydraulic liquid
• Brake discs with hub or in flange-mounted
• Console construction (Please advise requested clamp position and dimensions)

The post Phanh an toàn type SCFH ROMER Fordertechnik | CALIPER SAFETY DISC BRAKE TYPE SCFH appeared first on tmpinstrument.com.

Đại lý ROMER FORDERTECHNIK tại Việt Nam

Phanh đĩa type RST ROMER FORDERTECHNIK

DISC BRAKE TYPE RST / SERVICE BRAKE

Product description

"Fast speed" brake. Fail-Safe principle!

• Torque adjustable
• For brake disc ø 250 mm to ø 1250 mm
• Braking torques from 200 Nm up to 22000 Nm per brake
• NEW OPTION: With "SLM" synchro-lifting-mechanism (guarantees equal air gaps between brake lining and brake disc)
• MADE IN GERMANY, own production

FUNCTIONAL PRINCIPLE

• Braking by spring force
• Lifting electro-hydraulically (thruster) - Standard version
• Different sizes:
• RST-0, RST-0-L (horizontal), RST-1, RST-2, RST-3, RST-4
• Vertical and horizontal versions (RST-0-L)
• Sintered brake linings as standard for higher friction speeds

OPTIONS

• Limit switch protection: Mechanical or inductive
• "Brake opened", "Brake closed", "Brake check/wear"
• Hand lifting device
• Safety limit switch for "hand lifting device in use"
• Automatic wear adjustment (AVN)
• Special painting (Please specify RAL color)
• Special construction
• Thruster TURBO Control System (faster brake reaction times)
• Cooling systems for thrusters / Protection against overheating

The post DISC BRAKE TYPE RST ROMER FORDERTECHNIK | Phanh đĩa type RST ROMER FORDERTECHNIK appeared first on tmpinstrument.com.