Fanless control cabinet Industrial PC C6915-0000 Beckhoff

tmpinstrument — 2020-03-03 10:49:18

Fanless control cabinet Industrial PC C6915-0000 Beckhoff Readmore

C6915-0000 Beckhoff

Fanless control cabinet Industrial PC

PC công nhiệp hãng Beckhoff

Variants	Processor	available
C6915-0020	Intel Atom®, 2 Cores (TC3: 40) or Intel Atom®, 4 Cores (TC3: 50)	May 2020
C6915-0010	Intel Atom®, 1 Core (TC3: 40), Intel Atom®, 2 Cores (TC3: 40) or Intel Atom®, 4 Cores (TC3: 50*)	yes
C6915-0000	Intel Atom® (TC3: 40*)	yes, but not recommended for new projects

Techinal data

C6915-0000

Fanless control cabinet PC

Housing

fanless Industrial PC for space-saving control cabinet installation

mounting sheet at the rear wall

all connectors on the front

status LEDs

lithium battery accessible behind the front flap

1 slot for one Compact Flash card behind the front flap

passive cooling without fan

5 cm (2") free space on top and bottom of the PC necessary for air circulation

protection class IP 20

operating temperature 0…55 °C

weight of the basic configuration 1.25 kg (2.8 lbs)

compact dimensions (W x H x D) 48 x 164 x 119 mm (1.9" x 6.5" x 4.7"), without mounting plate

Features

Intel Atom® Z510 1.1 GHz (TC3: 40)

3½-inch motherboard for Intel Atom®

1 Mini PCI slot free for cards installed ex factory

1 GB DDR2 RAM, expandable to 2 GB

on-board graphic adapter, Intel® GMA 500, DVI-D connector

on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector

128 MB Compact Flash card, extended temperature range

4 USB 2.0 ports

24 V DC power supply

operating system Microsoft Windows CE 6, English

Options

Options	C6915-0000
C9900-C536	processor Intel Atom® Z530 1.6 GHz (TC3: 40), instead of Intel Atom® Z510 1.1 GHz (TC3: 40)
C9900-R244	memory extension to 2 GB DDR2RAM, instead of 1 GB
C9900-M653	mounting plate at the side wall, instead of plate at the rear wall
C9900-E252	Serial port RS232, optically linked, overload protection,D-sub 9-pin connector. An additional fieldbus card or an additional serial interface is not possible.
C9900-E253	Serial port RS485, optically linked, overload protection, D-sub 9-pin connector. An additional fieldbus card or an additional serial interface is not possible. Configuration as an end point without echo: echo off, auto send on, always send off, auto receive on, always receive off, termination on
C9900-E254	Serial port RS422, optically linked, overload protection, D-sub 9-pin connector. An additional fieldbus card or an additional serial interface is not possible. Configuration as a full duplex end point: echo on, auto send off, always send on, auto receive off, always receive on, termination on
C9900-R230	memory module NOVRAM for fail-safe storage of process data, 128 kB, Mini PCI plug-in card
C9900-R231	memory module NOVRAM for fail-safe storage of process data, 256 kB, Mini PCI plug-in card
C9900-R232	memory module NOVRAM for fail-safe storage of process data, 512 kB, Mini PCI plug-in card
C9900-H504	2 GB Compact Flash card, extended temperature range, instead of 128 MB Compact Flash
C9900-H505	4 GB Compact Flash card, extended temperature range, instead of 128 MB Compact Flash
C9900-H506	8 GB Compact Flash card, extended temperature range, instead of 128 MB Compact Flash
C9900-H507	16 GB Compact Flash card, extended temperature range, instead of 128 MB Compact Flash
C9900-D181	2 slots for Compact Flash cards, instead of 1 slot for Compact Flash cards, not possible together with a serial interface or a Mini-PCI card with connector
C9900-H515	2 GB Compact Flash card, extended temperature range
C9900-H516	4 GB Compact Flash card, extended temperature range
C9900-H517	8 GB Compact Flash card, extended temperature range
C9900-H518	16 GB Compact Flash card, extended temperature range
C9900-D182	slot for one 2½-inch hard disk or SSD, instead of 1 slot for Compact Flash cards
C9900-H148	hard disk, 2½-inch, 320 GB, instead of 128 MB Compact Flash, requires Windows Embedded Standard, Windows XP Professional or Windows 7
C9900-H703	solid-state disk SSD, SLC flash, 2½-inch, 32 GB, instead of 128 MB Compact Flash card, requires Windows Embedded Standard, Windows XP Professional or Windows 7
C9900-H708	solid-state disk SSD, SLC flash, 2½-inch, 64 GB, instead of 128 MB Compact Flash card, requires Windows Embedded Standard, Windows XP Professional or Windows 7
C9900-H738	solid-state disk SSD, SLC flash, 2½-inch, 128 GB, instead of 128 MB Compact Flash card
C9900-U209	uninterruptible power supply UPS, integrated into the 24 V power supply, without battery
C9900-U330	battery pack for PCs with 24 V power supply and integrated UPS C9900-P209 or C9900-U209, external, for DIN rail mounting, 3.4 Ah, operating temperature 0…50 °C
C9900-U332-0010	battery pack for 24 V power supply with integrated UPS C9900-U209 at PCs with Intel Atom® or Celeron® ULV 827E 1.4 GHz processor, external, for DIN rail mounting, 1.3 Ah, operating temperature 0…50 °C
C9900-U211	internal, capacitive 1-second UPS to ensure secure backup of persistent application data on the Compact Flash card, hard disk or SSD, requires TwinCAT and Windows Embedded Standard with Enhanced Write Filter or Windows CE
C9900-S701	TwinCAT PLC run-time for Microsoft Windows CE
C9900-S702	TwinCAT NC PTP run-time for Microsoft Windows CE
C9900-S705	TwinCAT NC I run-time for Microsoft Windows CE

The post Fanless control cabinet Industrial PC C6915-0000 Beckhoff appeared first on tmpinstrument.com.

EL1008 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối Beckoff tại Việt Nam

tmpinstrument — 2019-10-09 21:47:32

Tăng Minh Phát hiện đang là nhà phân phối thiết bị Beckhoff tại Việt Nam

8-channel digital input terminal 24 V DC, 3 ms

The EL1008 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL100x series have a 3 ms input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data	EL1008 \| ES1008
Connection technology	1-wire
Specification	EN 61131-2, type 1/3
Number of inputs	8
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (EN 61131-2, type 3)
“1“ signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	8 inputs
Configuration	no address or configuration setting
Special features	standard input terminal for bouncing signals (filter 3 ms)
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/see documentation
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex, IECEx

The post EL1008 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối Beckoff tại Việt Nam appeared first on tmpinstrument.com.

EL1004 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối beckhoff tại Việt Nam

tmpinstrument — 2019-10-09 21:38:06

Tăng Minh Phát hiện đang là nhà phân phối thiết bị Beckhoff tại Việt Nam

4-channel digital input terminal 24 V DC, 3 ms

The EL1004 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL100x series have a 3 ms input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data	EL1004 \| ES1004
Connection technology	2-wire
Specification	EN 61131-2, type 1/3
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	-3…+5 V (EN 61131-2, type 3)
“1” signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	standard input terminals for 2-wire connection
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals/markings	CE, UL, ATEX, IECEx
Ex-Marking	II 3 G Ex nA IIC T4 Gc Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc

Ordering information
EL1004-0020	4-channel digital input terminal 24 V DC, functional isolation 2500 V, (Testing voltage E-bus/field potential, production test); CE, UL

The post EL1004 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối beckhoff tại Việt Nam appeared first on tmpinstrument.com.

EL1002 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối Beckoff tại Việt Nam

tmpinstrument — 2019-10-09 21:30:27

Tăng Minh Phát hiện đang là nhà phân phối thiết bị Beckhoff tại Việt Nam

2-channel digital input terminal 24 V DC, 3 ms

The EL1002 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL100x series have a 3 ms input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data	EL1002 \| ES1002
Connection technology	4-wire
Specification	EN 61131-2, type 1/3
Number of inputs	2
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	-3…+5 V (EN 61131-2, type 3)
“1” signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	2 inputs
Configuration	no address or configuration setting
Special features	4-wire connection
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex, IECEx

The post EL1002 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối Beckoff tại Việt Nam appeared first on tmpinstrument.com.

Thiết bị đầu cuối EtherCAT EL9187 Beckhoff | Beckhoff Vietnam

tmpinstrument — 2019-07-23 16:32:38

Thiết bị đầu cuối EtherCAT EL9187 Beckhoff

Thiết bị phân nhánh điện thế EL9187 Beckhoff

EtherCAT System terminals EL9187 Beckhoff

The potential distribution terminal EL9186 provides eight terminal points with a potential and enable the voltage to be picked up without further bus terminal blocks or wiring.

Technical data	EL9187 \| ES9187
Technology	potential distribution terminal
Number of outputs	e.g.: 8 x 0 V contact
Current load	≤ 10 A
Power LED	–
Defect LED	–
Renewed infeed	–
Current consumption E-bus	–
Nominal voltage	≤ 60 V
Integrated fine-wire fuse	–
Electrical isolation	500 V (E-bus/field potential)
Diagnostics in the process image	–
Reported to E-bus	–
PE contact	–
Shield connection	–
Connection facility to additional power contact	8
Bit width in the process image	0
Electrical connection to DIN rail	–
Housing width in mm	12
Side by side mounting on EtherCAT Terminals with power contact	yes, left without PE
Side by side mounting on EtherCAT Terminals without power contact	–
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post Thiết bị đầu cuối EtherCAT EL9187 Beckhoff | Beckhoff Vietnam appeared first on tmpinstrument.com.

Thiết bị đầu cuối EtherCAT EL9186 Beckhoff | Đại lý Beckhoff tại Việt Nam

tmpinstrument — 2019-07-23 16:20:44

Thiết bị đầu cuối EtherCAT EL9186 Beckhoff

EtherCAT System Terminals EL 9186 Beckhoff

EL9186 | Potential distribution terminal, 8 x 24 V

The potential distribution terminal EL9187 provides eight terminal points with a potential and enable the voltage to be picked up without further bus terminal blocks or wiring

Technical data	EL9186 \| ES9186
Technology	potential distribution terminal
Number of outputs	e.g.: 8 x 24 V contact
Current load	≤ 10 A
Power LED	–
Defect LED	–
Renewed infeed	–
Current consumption E-bus	–
Nominal voltage	≤ 60 V
Integrated fine-wire fuse	–
Electrical isolation	500 V (E-bus/field potential)
Diagnostics in the process image	–
Reported to E-bus	–
PE contact	–
Shield connection	–
Connection facility to additional power contact	8
Bit width in the process image	0
Electrical connection to DIN rail	–
Housing width in mm	12
Side by side mounting on EtherCAT Terminals with power contact	yes, left without PE
Side by side mounting on EtherCAT Terminals without power contact	–
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post Thiết bị đầu cuối EtherCAT EL9186 Beckhoff | Đại lý Beckhoff tại Việt Nam appeared first on tmpinstrument.com.

Thiết bị đầu cuối Beckhoff EL9110 | Đại lý Beckhoff tại Việt Nam

tmpinstrument — 2019-07-19 13:39:29

Tăng Minh Phát - Nhà cung cấp thiết bị đầu cuối Beckhoff tại Việt Nam

EL9110 Beckhoff | Thiết bị đầu cuối cấp nguồn, 24V DC

EL9110 Beckhoff | Potential supply terminal, 24 V DC, with diagnostics

The EL9110 power feed terminal makes it possible to set up various potential groups with the standard voltage of 24 V DC. In order to monitor the supply voltage, the terminal with diagnostics function report the status of the power feed terminal to the EtherCAT Coupler through two input bits. It is thus possible for the controller to check the distributed peripheral voltage over the fieldbus.

Technical data	EL9110 \| ES9110
Technology	potential supply terminal with diagnostics
Current load	≤ 10 A
Power LED	green
Defect LED	–
Current consumption E-bus	typ. 90 mA
Nominal voltage	24 V DC
Integrated fine-wire fuse	–
Electrical isolation	500 V (E-bus/field potential)
Diagnostics in the process image	yes
Reported to E-bus	yes
PE contact	yes
Shield connection	–
Bit width in the process image	2
Electrical connection to DIN rail	–
Housing width in mm	12
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post Thiết bị đầu cuối Beckhoff EL9110 | Đại lý Beckhoff tại Việt Nam appeared first on tmpinstrument.com.

Cổng chuyển mạch Ethernet EL6601 Beckhoff | Beckhoff Vietnam

tmpinstrument — 2019-07-19 10:17:21

Tăng Minh Phát - Đại lý cung cấp cổng chuyển mạch Beckhoff tại Việt Nam

Thiết bị đầu cuối có cổng chuyển mạch Ethernets EL6601 BECKHOFF

EL6601 Beckhoff Vietnam | Cổng chuyển mạch Ethernet

EL6601 BECKHOFF | Ethernet switch port terminal | 1-port Ethernet Switch terminal

The EL6601 Ethernet switch port terminal is used for the decentralised connection of Ethernet devices to the EtherCAT Terminal network. The EtherCAT system relays the Ethernet communication of the connected devices fully transparent and collision-free.

The switch port terminal can be installed at any location within the EtherCAT strand. No configuration is required.

Further benefits underline the particular suitability for the application in industrial environments:

compact design in EtherCAT Terminal housing
10/100 Mbaud, half or full duplex, with automatic baud rate detection
support for network variables

Technical data	EL6601
Number of Ethernet ports	1
Bus system	all Ethernet (IEEE 802.3)-based protocols, store and forward switching mode
Ethernet interface	10BASE-T/100BASE-TX Ethernet with 1 x RJ45
Data transfer rates	10/100 Mbit/s, IEEE 802.3u auto-negotiation, half or full duplex at 10 and 100 Mbit/s possible, automatic settings
Cable length	up to 100 m twisted pair
Hardware diagnosis	status LEDs
Power supply	via the E-bus
Distributed clocks	–
Electrical isolation	500 V (E-bus/Ethernet)
Protocol	all Ethernet (IEEE 802.3)-based protocols, store and forward switching mode
Configuration	no
Current consumption power contacts	–
Current consumption E-bus	typ. 310 mA
Special features	support of RT Ethernet, publisher/subscriber, DHCP/BootP address allovation (1 device)
Weight	approx. 75 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex, IECEx

The post Cổng chuyển mạch Ethernet EL6601 Beckhoff | Beckhoff Vietnam appeared first on tmpinstrument.com.

Thiết bị đầu cuối EL6021 Beckhoff | Đại lý Beckhoff tại Việt Nam

tmpinstrument — 2019-07-19 08:49:15

Thiết bị đầu cuối EL6021 Beckhoff | Đại lý Beckhoff tại Việt Nam Readmore

Beckhoff Vietnam - Nhà cung cấp thiết bị Beckhoff tại thị trường Việt Nam

Cổng kết nối thiết bị đầu cuối EL6021 Beckhoff

Giao diện kết nối EL6021 Beckhoff

Beckhoff EL6021 Serial interface RS422/RS485

EtherCAT Terminal Communication EL6021 Beckhoff Vietnam

The EL6021 serial interface enables the connection of devices with RS422 or RS485 interface. These devices communicate with the automation device via the coupler. The active communication channel operates independently of the higher-level bus system in full or half duplex mode at up to 115.2 kbaud. The transmission of differential signals according to RS422 guarantees high immunity to interference through electrically isolated signals.

In conjunction with the TwinCAT Virtual Serial COM Driver (see TwinCAT Supplements – Communication) the EL6021 can be used as a normal Windows COM interface.

Technical data	EL6021 \| ES6021
Technology	terminal contact
Data transfer channels	TxD and RxD, full/half duplex
Data transfer rates	2400…115,200 baud; default: 9600 baud, 8 data bits, no parity and one stop bit
Bit transfer	with differential signal
Line impedance	120 Ω
Cable length	approx. 1000 m twisted pair
Interfaces	1 x RS422/RS485
Providing external supply	–
Power supply	via the E-bus
Electrical isolation	500 V (E-bus/signal voltage)
Data buffer	864 bytes receive buffer, 128 bytes transmit buffer
Bit width in the process image	22 x 8 bit input, 22 x 8 bit output, 16 bit control, 16 bit status
Configuration	no address setting, configuration via PLC
Current consumption E-bus	typ. 170 mA
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex, IECEx
Special terminals
EL6021-0021	RS422/485 line device
Accessories
TS6360	license for using the TwinCAT Virtual Serial COM Driver for Windows and Windows CE platforms
System
RS485	For further RS485 products please see the system overview.

The post Thiết bị đầu cuối EL6021 Beckhoff | Đại lý Beckhoff tại Việt Nam appeared first on tmpinstrument.com.

Thiết bị đầu cuối Analog EL4732 Beckhoff | Đại lý Beckhoff Việt Nam

tmpinstrument — 2019-07-18 16:51:05

Thiết bị đầu cuối Analog EL4732 Beckhoff | Đại lý Beckhoff Việt Nam Readmore

Beckhoff Vietnam - Nhà cung cấp Module nguồn Beckhoff tại Việt Nam

Thiết bị đầu cuối Analog EL4732 | 2 channel -10...10V

EL4732 | 2-channel analog output terminal -10…+10 V with oversampling

EtherCAT Terminals EL4732 Beckhoff

The EL4732 analog output terminal generates signals in the range between -10 V and +10 V. The voltage is supplied to the process level with a resolution of 16 bits and is electrically isolated. The output channels have a common ground potential. The outputs are oversampled with an adjustable, integer multiple (oversampling factor: n) of the bus cycle time (n microcycles per bus cycle). For each microcycle, the EtherCAT Terminal receives a process data block that is output consecutively. The time base of the terminal can be synchronised precisely with other EtherCAT devices via distributed clocks. This procedure enables the temporal resolution of the analog output signals to be increased to n times the bus cycle time. In conjunction with the EL37xx (analog input terminal with oversampling), responses with equidistant time intervals, e.g. in the event of a threshold value being exceeded, become possible. The EL4732 device can output a maximum of 100,000 values (100 ksamples/s) per channel and second.

Technical data	EL4732 \| ES4732
Connection technology	2-wire, single-ended
Number of outputs	2
Power supply	via the E-bus
Signal voltage	-10…+10 V
Oversampling factor	n = 1…100 selectable
Distributed clocks	yes
Distributed clock precision	<< 1 µs
Load	> 5 kΩ (short-circuit proof)
Output error	< 0.1 % (relative to end value)
Resolution	16 bit (incl. sign)
Electrical isolation	500 V (E-bus/signal voltage)
Conversion time	~ 10 µs
Output rate	max. 100 ksamples/s
Current consumption power contacts	–
Current consumption E-bus	typ. 180 mA
Bit width in the process image	n x 2 x 16 bit output, 32 bit CycleCounter
Special features	oversampling
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex, IECEx

The post Thiết bị đầu cuối Analog EL4732 Beckhoff | Đại lý Beckhoff Việt Nam appeared first on tmpinstrument.com.

EtherCAT Terminals EL4132Beckhoff | Đại lý Beckhoff Việt Nam

tmpinstrument — 2019-07-18 11:02:12

Đại lý Beckhoff tại Việt Nam

Thiết bị đầu cuối Analog EL4132 | 2 channel 10...10V , 16 bit

EL4132 | 2-channel analog output terminal -10…+10 V, 16 bit

EtherCAT EL4132 Beckhoff Vietnam

The EL4132 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 16 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common ground potential. The EL4132 combines two channels in one housing. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.

Technical data	EL4132 \| ES4132
Connection technology	2-wire, single-ended
Number of outputs	2
Power supply	via the E-bus
Signal voltage	-10…+10 V
Distributed clocks	yes
Distributed clock precision	<< 1 µs
Load	> 5 kΩ (short-circuit-proof)
Output error	< 0.1 % (relative to end value)
Resolution	16 bit (incl. sign)
Electrical isolation	500 V (E-bus/signal voltage)
Conversion time	~ 40 µs
Current consumption power contacts	–
Current consumption E-bus	typ. 210 mA
Bit width in the process image	2 x 16 bit AO output
Special features	Watchdog parameterisable; user synchronisation can be activated.
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EtherCAT Terminals EL4132Beckhoff | Đại lý Beckhoff Việt Nam appeared first on tmpinstrument.com.

Thiết bị đầu cuối Analog EL4002 Beckhoff | Beckhoff Vietnam

tmpinstrument — 2019-07-18 10:42:52

Đại lý Beckhoff tại Việt Nam

Thiết bị đầu cuối Analog 2-channel 0-10V, 12bit

EL4002 | 2-channel analog output terminal 0…10 V, 12 bit

EtherCAT terminal EL4002 Beckhoff Vietnam

The EL4002 analog output terminal generates signals in the range between 0 and 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common ground potential. The EL4002 combines two channels in one housing. The output stages are powered by the 24 V supply. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.

Technical data	EL4002 \| ES4002
Connection technology	2-wire, single-ended
Number of outputs	2
Power supply	24 V DC via power contacts
Signal voltage	0…10 V
Distributed clocks	yes
Distributed clock precision	<< 1 µs
Load	> 5 kΩ (short-circuit-proof)
Output error	< 0.1 % (relative to end value)
Resolution	12 bit
Electrical isolation	500 V (E-bus/signal voltage)
Conversion time	~ 150 µs
Current consumption power contacts	typ. 25 mA
Current consumption E-bus	typ. 140 mA
Bit width in the process image	2 x 16 bit AO output
Special features	Optional watchdog: user-specific output value with ramp; user synchronisation can be activated.
Weight	approx. 60 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post Thiết bị đầu cuối Analog EL4002 Beckhoff | Beckhoff Vietnam appeared first on tmpinstrument.com.

Thiết bị đầu cuối Analog EL3702 Beckhoff | Đại lý Beckhoff Việt Nam

tmpinstrument — 2019-07-18 09:36:56

Đại lý Beckhoff tại thi trường Việt Nam

Thiết bị đầu cuối Analog EL3702 Beckhoff Vietnam

EL3702 | 2-channel analog input terminal -10…+10 V with oversampling

EtherCAT terminals EL3702 Beckhoff Vietnam

The EL3702 analog input terminal handles signals in the range between -10 and +10 V. The voltage is digitised to a resolution of 16 bits, and is transmitted, electrically isolated, to the controller. The signals are oversampled with an adjustable, integer multiple (oversampling factor: n) of the bus cycle time (n microcycles per bus cycle). For each microcycle, the EtherCAT Terminal generates a process data block that is transferred collectively during the next bus cycle. The time base of the terminal can be synchronised precisely with other EtherCAT devices via distributed clocks. This procedure enables the temporal resolution of the analog input signals to be increased to n times the bus cycle time. In conjunction with the EL47xx (analog output terminal with oversampling), responses with equidistant time intervals, e.g. in the event of a threshold value being exceeded, become possible.

The distributed clocks function enables several EL3702 devices to be synchronised in almost any configuration. The maximum sampling rate per channel is 100 ksamples/s (100,000 samples/s).

Technical data	EL3702 \| ES3702
Number of inputs	2 (differential)
Power supply	via the E-bus
Technology	differential input, oversampling
Signal voltage	-10…+10 V
Max. sampling rate	max. 10 µs/100 ksps (per channel, simultaneously)
Oversampling factor	n = 1…100 selectable (max. 100 ksamples/s)
Input signal bandwidth	0…30 kHz recommended
Distributed clocks	yes
Distributed clock precision	<< 1 µs
Internal resistance	> 200 kΩ
Input filter limit frequency	80 kHz
Common-mode voltage UCM	max. 35 V
Conversion time	~ 10 µs per sample
Resolution	16 bit (incl. sign)
Measuring error	< ±0.3 % up to 10 Hz (relative to full scale value)
Electrical isolation	500 V (E-bus/signal voltage)
Current consumption power contacts	–
Current consumption E-bus	typ. 200 mA
Bit width in the process image	input: n x 2 x 16 bit data; optionally 2 x 16 bit cycle counter, 4 byte StartNextLatch time
Special features	oversampling
Weight	approx. 60 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals/markings	CE, UL, ATEX, IECEx
Ex-Marking	II 3 G Ex nA IIC T4 Gc Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc

The post Thiết bị đầu cuối Analog EL3702 Beckhoff | Đại lý Beckhoff Việt Nam appeared first on tmpinstrument.com.

Thiết bị đầu cuối EL3413 Beckhoff | Đại lý Beckhoff tại Việt Nam

tmpinstrument — 2019-07-17 16:59:41

Thiết bị đầu cuối EL3413 Beckhoff | Đại lý Beckhoff tại Việt Nam Readmore

Beckhoff Vietnam - Đại lý cung cấp thiết bị đầu cuối Beckhoff tại Việt Nam

EtherCAT EL3413 Beckhoff | Thiết bị đầu cuối đo điện 3 pha lên đến 690V AC

EL3413 | 3-phase power measurement terminal up to 690 V AC

Analog output EL3413 Beckhoff Vietnam

EtherCAT Terminal EL3413 Beckhoff Vietnam

Thiết bị đầu cuối đo điện EL3413 EtherCAT là sự phát triển vượt bậc của EL3403. Với mức đo tối đa 690 V AC, các đầu vào điện áp được tối ưu hóa để giám sát trực tiếp các máy phát hiệu suất cao, như được sử dụng trong ngành điện gió chẳng hạn. Không có máy biến điện áp ngược dòng được yêu cầu. Các đầu vào hiện tại được cách ly về mặt điện để thiết bị đầu cuối có thể được sử dụng trong tất cả các cấu hình máy biến dòng được nối đất phổ biến như cấu hình 2 hoặc 3 máy biến áp có kết nối sao hoặc delta. EL3413 có thể đối phó với phân tích mạng đơn giản cho đến phân tích hài thứ 21. Giống như tất cả các dữ liệu đầu cuối được đo, nội dung hài có thể được đọc thông qua dữ liệu quá trình.

Thiết bị đầu cuối đo công suất EL3413, EL3413-0001 và EL3413-0120 có tiêu chuẩn đo dòng điện trung tính theo tiêu chuẩn kể từ quý 3 năm 2015. Không tính thêm chi phí cho người dùng cuối, các thiết bị đầu cuối có một shunt giữa pin 4 và pin 8, theo thứ tự để cho phép phân tích dây dẫn trung tính trực tiếp.

Technical data	EL3413	EL3413-0001
Number of inputs	4 x current, 3 x voltage
Technology	3-phase power measurement for alternating voltages
Oversampling factor	–
Distributed clocks	–
Conversion time	mains-synchronous
Measured values	current (I1, I2, I3, In), voltage, effective power, reactive power, apparent power, energy, cos φ, frequency, harmonic
Measuring voltage	max. 690 V AC 3~ (ULX-N: max. 400 V AC)	max. 600 V AC 3~ (ULX-N: max. 346 V AC)
Measuring current	adjustable, 100 mA, 1 A (default), 5 A; potential-free
Resolution	1 μA, 0.1 mV, 10 mW
Measuring error	0.5 % relative to full scale value (U/I), 1 % calculated value
Electrical isolation	4500 V
Current consumption power contacts	–
Current consumption E-bus	typ. 160 mA
Special features	galvanically isolated current inputs, harmonic analysis, single-phase operation also possible
Weight	approx. 100 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE	CE, UL

The post Thiết bị đầu cuối EL3413 Beckhoff | Đại lý Beckhoff tại Việt Nam appeared first on tmpinstrument.com.

EtherCAT Terminals EL3312 Beckhoff | Đại lý Beckhoff Việt Nam

tmpinstrument — 2019-07-17 16:24:00

EtherCAT Terminals EL3312 Beckhoff | Đại lý Beckhoff Việt Nam Readmore

Beckhoff Vietnam - Nhà cung cấp Module Beckhoff tại Việt Nam

Thiết bị đầu cuối EL3312 Beckhoff Vietnam

EL3312 | 2-channel thermocouple input terminal with open-circuit recognition

Digital output EL3312 Beckhoff Vietnam

EtherCAT Terminal EL3312 Beckhoff Vietnam

Technical data	EL3312
Number of inputs	2
Power supply	via the E-bus
Thermocouple sensor types	types K, J, L, E, T, N, U, B, R, S, C (default setting type K), mV measurement
Distributed clocks	–
Input filter limit frequency	typ. 1 kHz; dependent on sensor length, conversion time, sensor type
Connection method	2-wire
Wiring fail indication	yes
Conversion time	approx. 1.2 s up to 20 ms, depending on configuration and filter setting, default: approx. 125 ms
Temperature range	in the range defined in each case for the sensor (default setting: type K; -200…+1370 °C); voltage measurement: ±30 mV…±75 mV
Resolution	0.1 °C per digit
Measuring error	< ±0.3 % (relative to full scale value)
Electrical isolation	500 V (E-bus/signal voltage)
Current consumption power contacts	–
Current consumption E-bus	200 mA
Bit width in the process image	2 x 32 bit TC input, 2 x 16 bit TC output
Special features	open-circuit recognition
Weight	approx. 60 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EtherCAT Terminals EL3312 Beckhoff | Đại lý Beckhoff Việt Nam appeared first on tmpinstrument.com.

Thiết bị đầu ra kỹ thuật số cho máy HUSKY EL2622 Beckhoff | Beckhoff Vietnam

tmpinstrument — 2019-07-17 14:25:07

Thiết bị đầu ra kỹ thuật số cho máy HUSKY EL2622 Beckhoff | Beckhoff Vietnam Readmore

Beckhoff Vietnam - Nhà cung cấp thiết bị Beckhoff tại thì trường Việt Nam

EL2622 | 2-channel relay output terminal 230 V AC, 5 A, potential-free make contacts, no power contacts

Digital output EL2622 Beckhoff Vietnam

EtherCAT Terminal EL2622 Beckhoff Vietnam

Technical data	EL2622 \| ES2622
Connection technology	relay output
Number of outputs	2 x make contacts
Nominal voltage	230 V AC/30 V DC
Load type	ohmic, inductive, lamp load
Distributed clocks	–
Ohmic switching current	5 A AC/DC per channel
Inductive switching current	2 A AC/DC per channel
Minimum permitted load	10 mA at 5 V DC
Lamp test, electronic ballast	4 x 58 W
Current consumption E-bus	typ. 170 mA
Electrical isolation	500 V (E-bus/field potential)
Current consumption power contacts	–
Bit width in the process image	2 outputs
Operating cycles mech. (min.)	2 x 107
Operating cycles electr. (min.)	1 x 105 (5 A/30 V DC)
Configuration	no address or configuration setting
Special features	–
Weight	approx. 50 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL

The post Thiết bị đầu ra kỹ thuật số cho máy HUSKY EL2622 Beckhoff | Beckhoff Vietnam appeared first on tmpinstrument.com.

EtherCAT Terminals EL2024 Beckhoff | Đại lý Beckhoff Việt Nam

tmpinstrument — 2019-07-17 11:29:36

EtherCAT Terminals EL2024 Beckhoff | Đại lý Beckhoff Việt Nam Readmore

Beckhoff Vietnam - Nhà cung cấp Terminals Beckhoff tại Việt Nam

EL2024 Beckhoff Vietnam | 4-channel digital output terminal 24 V DC, 2 A

EL2024 Beckhoof Vietnam | Đầu ra kỹ thuật số 4 kênh 24 V DC, 2 A

Thiết bị đầu cuối kỹ thuật số EL2024 Beckhoff Vietnam kết nối các tín hiệu điều khiển nhị phân 24 V, được cách ly bằng điện, với các bộ truyền động. Bốn kênh có sẵn và cho biết trạng thái tín hiệu của chúng thông qua đèn LED. Thiết bị đầu cuối cho phép kết nối trực tiếp của bốn bộ truyền động 2 dây. Chúng có bốn điểm kết nối.

Thông số kỹ thuật EL 2024 Beckhoff Vietnam:

Technical data	EL2024 \| ES2024
Connection technology	2-wire
Number of outputs	4
Rated load voltage	24 V DC (-15 %/+20 %)
Load type	ohmic, inductive, lamp load
Distributed clocks	–
Max. output current	2.0 A (short-circuit-proof) per channel
Short circuit current	typ. < 70 A
Reverse voltage protection	yes
Breaking energy	< 1.7 J/channel
Switching times	typ. TON: 40 µs, typ. TOFF: 200 µs
Current consumption E-bus	typ. 120 mA
Electrical isolation	500 V (E-bus/field potential)
Current consumption power contacts	typ. 13 mA + load
Bit width in the process image	4 outputs
Configuration	no address or configuration setting
Special features	–
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EtherCAT Terminals EL2024 Beckhoff | Đại lý Beckhoff Việt Nam appeared first on tmpinstrument.com.

Module ngõ ra 24VDC EL2004 Beckhoff | Đại lý Beckhoff tại Việt Nam

tmpinstrument — 2019-07-17 11:05:46

Module ngõ ra 24VDC EL2004 Beckhoff | Đại lý Beckhoff tại Việt Nam Readmore

Beckhoff Vietnam - Nhà cung cấp hệ thông I/O Beckhoff tại Việt Nam

Thiết bị đầu ra kỹ thuật số 4 kênh 24VDC EL2004 Beckhoof

EL2004 | 4-channel digital output terminal 24 V DC, 0.5 A, 2-wire system

Thiết bị đầu ra kỹ thuật số EL2004 kết nối các tín hiệu điều khiển nhị phân từ bộ phận tự động hóa đến các bộ truyền động ở cấp quy trình với cách ly điện. Thiết bị đầu ra EtherCAT chỉ trạng thái tín hiệu của nó thông qua đèn LED.

Thông số kỹ thuật EL2004 Beckhoff:

Technical data	EL2004 \| ES2004
Connection technology	2-wire
Number of outputs	4
Rated load voltage	24 V DC (-15 %/+20 %)
Load type	ohmic, inductive, lamp load
Distributed clocks	–
Max. output current	0.5 A (short-circuit-proof) per channel
Short circuit current	typ. < 2 A
Reverse voltage protection	yes
Breaking energy	< 150 mJ/channel
Switching times	typ. TON: 60 µs, typ. TOFF: 300 µs
Current consumption E-bus	typ. 100 mA
Electrical isolation	500 V (E-bus/field potential)
Current consumption power contacts	typ. 15 mA + load
Bit width in the process image	4 outputs
Configuration	no address or configuration setting
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

Tăng Minh Phát - Đại lý Beckhoff số 1 tại thị trường Việt Nam!

The post Module ngõ ra 24VDC EL2004 Beckhoff | Đại lý Beckhoff tại Việt Nam appeared first on tmpinstrument.com.

EtherCAT EL3152 Beckhoff - Đại lý Beckhoff tại Việt Nam

tmpinstrument — 2019-06-29 15:39:03

Tăng Minh Phát là Đại lý Beckhoff tại Việt Nam

EL3152 | 2-channel analog input terminal 4…20 mA, single-ended, 16 bit

The job of the EL3152 analog input terminal is to supply power to measuring transducers located in the field and to transmit analog measurement signals with electrical isolation to the automation device. The voltage for the sensors is supplied to the terminals via the power contacts. The power contacts can optionally be supplied with operating voltage in the standard way or via a supply terminal (EL9xxx) with electrical isolation. The input electronics are independent of the supply voltage of the power contacts. The reference potential for the inputs is the 0 V power contact. The EtherCAT Terminal indicates its signal state by means of light emitting diodes. The error LEDs indicate an overload condition and a broken wire.

Technical data	EL3152 \| ES3152
Number of inputs	2 (single-ended)
Power supply	via the E-bus
Technology	single-ended
Signal current	4…20 mA
Distributed clocks	yes
Internal resistance	typ. 85 Ω + diode voltage
Input filter limit frequency	5 kHz
Dielectric strength	max. 30 V
Conversion time	~ 60 µs (fast mode ~ 40 µs)
Resolution	16 bit (incl. sign)
Measuring error	< ±0.3 % (relative to full scale value)
Electrical isolation	500 V (E-bus/signal voltage)
Current consumption power contacts	–
Current consumption E-bus	typ. 170 mA
Bit width in the process image	inputs: 8 byte
Special features	standard and compact process image, activatable FIR/IIR filters, limit value monitoring
Weight	approx. 60 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EtherCAT EL3152 Beckhoff - Đại lý Beckhoff tại Việt Nam appeared first on tmpinstrument.com.

EtherCAT EL5001 Beckhoff - Beckhoff Việt Nam

tmpinstrument — 2019-06-29 15:16:26

Tăng Minh Phát là Đại lý Beckhoff tại Việt Nam

EtherCAT EL5001 Giao diện mã hóa SSI

Position measurement EL5001

EL500 | SSI encoder interfaces

Giao diện EtherCAT EL5001 cho phép kết nối trực tiếp bộ mã hóa SSI. Mạch giao diện tạo ra một xung để đọc bộ mã hóa và làm cho luồng dữ liệu đến có sẵn cho bộ điều khiển dưới dạng một từ dữ liệu trong hình ảnh quá trình. Các chế độ hoạt động khác nhau, tần số truyền và độ rộng bit có thể được lưu trữ vĩnh viễn trong một thanh ghi điều khiển.

Technical data	EL5001 \| ES5001
Technology	SSI encoder interface
Number of channels	1
Encoder connection	D+, D-, Cl+, Cl-
Signal output (pulse)	difference signal (RS422)
Signal input (data)	difference signal (RS422)
Power supply	24 V via power contacts
Current consumption	typ. 20 mA without encoder
Encoder supply	24 V DC via power contacts
Data transfer rates	variable up to 1 MHz, 250 kHz default
Serial input	24 bit width (variable)
Data direction	read
Bit width in the process image	1 x 32 bit input, 8 bit status
Current consumption power contacts	typ. 20 mA
Current consumption E-bus	typ. 120 mA
Distributed clocks	yes
Special features	adjustable baud rate, coding and data length
Electrical isolation	500 V (E-bus/field potential)
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

Related products
EL5001-0011	SSI monitor terminal, no clock output (simply listening)
EL5002	2-channel SSI encoder interface

The post EtherCAT EL5001 Beckhoff - Beckhoff Việt Nam appeared first on tmpinstrument.com.

EtherCAT EK1110 Beckhoff - Đại lý Beckhoff Việt Nam

tmpinstrument — 2019-06-29 14:54:09

Tăng Minh Phát là Đại lý Beckhoff tại Việt Nam

EK1110 | EtherCAT extension

Giống như thiết bị đầu cuối cuối E-bus, tiện ích mở rộng EK1110 EtherCAT được kết nối với phần cuối của khối EtherCAT Terminal. Thiết bị đầu cuối cung cấp tùy chọn kết nối cáp Ethernet với đầu nối RJ45, do đó mở rộng chuỗi EtherCAT cách ly điện lên đến 100 m. Trong thiết bị đầu cuối EK1110, tín hiệu E-bus được chuyển đổi khi đang bay thành biểu diễn tín hiệu Ethernet 100BASE-TX. Cung cấp năng lượng cho thiết bị điện tử EK1110 thông qua E-bus. Không có nhiệm vụ tham số hóa hoặc cấu hình được yêu cầu.

Technical data	EK1110
Task within EtherCAT system	conversion of the E-bus signals to 100BASE-TX Ethernet for extension of the EtherCAT network
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	100 m (100BASE-TX)
Protocol	any EtherCAT protocol
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	1 x RJ45
Power supply	from E-bus
Current consumption E-bus	typ. 130 mA
Electrical isolation	500 V (supply voltage/Ethernet)
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EtherCAT EK1110 Beckhoff - Đại lý Beckhoff Việt Nam appeared first on tmpinstrument.com.

EL1014 Beckhoff - Beckhoff Vietnam

tmpinstrument — 2019-06-29 14:31:07

Tăng Minh Phát là Đại lý Beckhoff tại Việt Nam

EtherCAT Terminals | EtherCAT Thiết bị đầu cuối

EL1014 Thiết bị đầu cuối kỹ thuật số 4 kênh 24 V DC, 10 µs

EL1014 4-channel digital input terminal 24 V DC, 10 µs

Thiết bị đầu cuối kỹ thuật số EL1014 thu được các tín hiệu điều khiển nhị phân từ cấp quy trình và truyền chúng, ở dạng cách ly điện, đến đơn vị tự động hóa cấp cao hơn. Thiết bị đầu cuối kỹ thuật số từ sê-ri EL101x có bộ lọc đầu vào 10 con. Thiết bị đầu cuối EtherCAT chỉ trạng thái của họ thông qua đèn LED.

Thông số kỹ thuật EL1014 Beckhoff:

Technical data	EL1014 \| ES1014
Connection technology	2-wire
Specification	EN 61131-2, type 1/3
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (EN 61131-2, type 3)
“1“ signal voltage	15…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 10 µs
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	standard input terminals f0r 2-wire connection
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EL1014 Beckhoff - Beckhoff Vietnam appeared first on tmpinstrument.com.

Fanless control cabinet Industrial PC C6915-0000 Beckhoff

Techinal data

EL1008 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối Beckoff tại Việt Nam

EL1004 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối beckhoff tại Việt Nam

EL1002 Beckhoff | Beckhoff Việt Nam | Đại lý phân phối Beckoff tại Việt Nam

Thiết bị đầu cuối EtherCAT EL9187 Beckhoff | Beckhoff Vietnam

Thiết bị đầu cuối EtherCAT EL9187 Beckhoff | Beckhoff Vietnam

Thiết bị phân nhánh điện thế EL9187 Beckhoff

EtherCAT System terminals EL9187 Beckhoff

Thiết bị đầu cuối EtherCAT EL9186 Beckhoff | Đại lý Beckhoff tại Việt Nam

Thiết bị đầu cuối EtherCAT EL9186 Beckhoff | Đại lý Beckhoff tại Việt Nam

EtherCAT System Terminals EL 9186 Beckhoff

EL9186 | Potential distribution terminal, 8 x 24 V

Thiết bị đầu cuối Beckhoff EL9110 | Đại lý Beckhoff tại Việt Nam

Tăng Minh&nbsp;Phát - Nhà cung cấp thiết bị đầu cuối Beckhoff tại Việt Nam

Beckhoff Việt Nam - Đại lý phân phối Beckhoff tại Việt Nam

EL9110 Beckhoff | Thiết bị đầu cuối cấp nguồn, 24V DC

EL9110 Beckhoff | Potential supply terminal, 24 V DC, with diagnostics

Cổng chuyển mạch Ethernet EL6601 Beckhoff | Beckhoff Vietnam

Tăng Minh Phát - Đại lý cung cấp cổng chuyển mạch Beckhoff tại Việt Nam

Beckhoff Vietnam - Nhà cung cấp thiết bị hãng BECKHOFF tại Việt Nam

Thiết bị đầu cuối có cổng chuyển mạch Ethernets EL6601 BECKHOFF

EL6601 Beckhoff Vietnam | Cổng chuyển mạch Ethernet

EL6601 BECKHOFF | Ethernet switch port terminal | 1-port Ethernet Switch terminal

Thiết bị đầu cuối EL6021 Beckhoff | Đại lý Beckhoff tại Việt Nam

Beckhoff Vietnam - Nhà cung cấp thiết bị Beckhoff tại thị trường Việt Nam

Cổng kết nối thiết bị đầu cuối EL6021 Beckhoff

Giao diện kết nối EL6021 Beckhoff

Beckhoff EL6021 Serial interface RS422/RS485

EtherCAT Terminal Communication EL6021 Beckhoff Vietnam

Thiết bị đầu cuối Analog EL4732 Beckhoff | Đại lý Beckhoff Việt Nam

Beckhoff Vietnam - Nhà cung cấp Module nguồn Beckhoff tại Việt Nam

Thiết bị đầu cuối Analog EL4732 | 2 channel -10...10V

EL4732 | 2-channel analog output terminal -10…+10 V with oversampling

EtherCAT Terminals EL4732 Beckhoff

EtherCAT Terminals EL4132Beckhoff | Đại lý Beckhoff Việt Nam

Beckhoff Vietnam - Nhà cung cấp thiết bị đầu cuối Analog Beckhoff tại thị trường Việt Nam

Thiết bị đầu cuối Analog EL4132 | 2 channel 10...10V , 16 bit

EL4132 | 2-channel analog output terminal -10…+10 V, 16 bit

EtherCAT EL4132 Beckhoff Vietnam

Thiết bị đầu cuối Analog EL4002 Beckhoff | Beckhoff Vietnam

Beckhoff Vietnam - Nhà cung cấp Thiết bị đầu cuối Analog Beckhoff tại thị trường Việt Nam

Thiết bị đầu cuối Analog 2-channel 0-10V, 12bit

EL4002 | 2-channel analog output terminal 0…10 V, 12 bit

EtherCAT terminal EL4002 Beckhoff Vietnam

Thiết bị đầu cuối Analog EL3702 Beckhoff | Đại lý Beckhoff Việt Nam

Đại lý Beckhoff tại thi trường Việt Nam

Beckhoff Vietnam - Nhà cung cấp Module nguồn Beckhoff tại Việt Nam.

Thiết bị đầu cuối Analog EL3702 Beckhoff Vietnam

EL3702 | 2-channel analog input terminal -10…+10 V with oversampling

EtherCAT terminals EL3702 Beckhoff Vietnam

Thiết bị đầu cuối EL3413 Beckhoff | Đại lý Beckhoff tại Việt Nam

Beckhoff Vietnam - Đại lý cung cấp thiết bị đầu cuối Beckhoff tại Việt Nam

EtherCAT EL3413 Beckhoff | Thiết bị đầu cuối đo điện 3 pha lên đến 690V AC

EL3413 | 3-phase power measurement terminal up to 690 V AC

Analog output EL3413 Beckhoff Vietnam

EtherCAT Terminal EL3413 Beckhoff Vietnam

Technical data

EL3413

EL3413-0001

Number of inputs

4 x current, 3 x voltage

Technology

3-phase power measurement for alternating voltages

Oversampling factor

–

Distributed clocks

–

Conversion time

mains-synchronous

Measured values

current (I1, I2, I3, In), voltage, effective power, reactive power, apparent power, energy, cos φ, frequency, harmonic

Measuring voltage

max. 690 V AC 3~ (ULX-N: max. 400 V AC)

max. 600 V AC 3~ (ULX-N: max. 346 V AC)

Measuring current

adjustable, 100 mA, 1 A (default), 5 A; potential-free

Resolution

1 μA, 0.1 mV, 10 mW

Measuring error

Tăng Minh Phát - Nhà cung cấp thiết bị đầu cuối Beckhoff tại Việt Nam