http://tmpinstrument.com/ 2026-03-14 13:47:51 +0000 vi hourly 1 Website Cảm biến đo độ rung CA134 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter http://tmpinstrument.com/cam-bien-do-do-rung-ca134-meggitt-vibrometer-vibration-sensor-meggitt-vibrometer 2020-03-14 09:30:23 http://tmpinstrument.com/cam-bien-do-do-rung-ca134-meggitt-vibrometer-vibration-sensor-meggitt-vibrometer Cảm biến đo độ rung CA134 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter Readmore

Đại lý Meggitt Vibro-Meter tại Việt Nam

Vibration sensor Meggitt Vibro-Meter

Cảm biến đo độ rung Meggitt Vibro-Meter

CA134 piezoelectric accelerometer

10 pC/g, −253 to 500 °C, up to 6000 Hz.

The CA134 piezoelectric accelerometer is a high-quality, high-reliability vibration sensor with a piezoelectric sensing element that provides a charge output. Accordingly, an external charge amplifier (IPC704 signal conditioner), is required to convert this charge-based signal into a current or a voltage signal.

The CA134 is designed and built for long-term use in extreme environments characterised by high temperatures and/or hazardous areas (potentially explosive atmospheres).

Cảm biến đo độ rung CA134 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter

Features

  • Designed for the long-term measurement of vibration in extreme environments, such as cryogenic applications and gas turbines
  • Very wide temperature range: −253 to 500 °C
  • Wide frequency response: 0.5 to 6000 Hz
  • Available as a sensor only (no integral cable), allowing different mineral-insulated (MI) cable assemblies to be used depending on the application
  • Certified for use in potentially explosive atmospheres

The post Cảm biến đo độ rung CA134 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter appeared first on tmpinstrument.com.

]]> Đại lý Meggitt Vibro-Meter tại Việt Nam

Vibration sensor Meggitt Vibro-Meter

Cảm biến đo độ rung Meggitt Vibro-Meter

CA134 piezoelectric accelerometer

10 pC/g, −253 to 500 °C, up to 6000 Hz.

The CA134 piezoelectric accelerometer is a high-quality, high-reliability vibration sensor with a piezoelectric sensing element that provides a charge output. Accordingly, an external charge amplifier (IPC704 signal conditioner), is required to convert this charge-based signal into a current or a voltage signal.

The CA134 is designed and built for long-term use in extreme environments characterised by high temperatures and/or hazardous areas (potentially explosive atmospheres).

Cảm biến đo độ rung CA134 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter

Features

  • Designed for the long-term measurement of vibration in extreme environments, such as cryogenic applications and gas turbines
  • Very wide temperature range: −253 to 500 °C
  • Wide frequency response: 0.5 to 6000 Hz
  • Available as a sensor only (no integral cable), allowing different mineral-insulated (MI) cable assemblies to be used depending on the application
  • Certified for use in potentially explosive atmospheres
]]> Cảm biến đo độ rung CV213 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter http://tmpinstrument.com/cam-bien-do-do-rung-cv213-meggitt-vibrometer-vibration-sensor-meggitt-vibrometer 2020-03-14 09:04:14 http://tmpinstrument.com/cam-bien-do-do-rung-cv213-meggitt-vibrometer-vibration-sensor-meggitt-vibrometer Cảm biến đo độ rung CV213 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter Readmore

Đại lý Meggitt Vibro-Meter tại Việt Nam

Vibration sensor Meggitt Vibro-Meter

Cảm biến đo độ rung Meggitt Vibro-Meter

CV213 velocity transducer

20 mV/mm/s, −29 to 204 °C, 10 to 1000 Hz.

The CV213 velocity sensor is a high-quality, high-reliability vibration sensor with an electromagnetic sensing element providing a voltage output that is directly proportional to the vibration velocity.

The CV213 is designed and built for use in harsh environments characterised by higher temperatures, damp and corrosive environments, and/or hazardous areas (potentially explosive atmospheres).

Cảm biến đo độ rung CV213 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter

Features

  • Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
  • Wide frequency response: 10 to 1000 Hz
  • Wide temperature range: −29 to 204 °C
  • Voltage output (20 mV/mm/s)
  • Certified for use in potentially explosive atmospheres

The post Cảm biến đo độ rung CV213 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter appeared first on tmpinstrument.com.

]]> Đại lý Meggitt Vibro-Meter tại Việt Nam

Vibration sensor Meggitt Vibro-Meter

Cảm biến đo độ rung Meggitt Vibro-Meter

CV213 velocity transducer

20 mV/mm/s, −29 to 204 °C, 10 to 1000 Hz.

The CV213 velocity sensor is a high-quality, high-reliability vibration sensor with an electromagnetic sensing element providing a voltage output that is directly proportional to the vibration velocity.

The CV213 is designed and built for use in harsh environments characterised by higher temperatures, damp and corrosive environments, and/or hazardous areas (potentially explosive atmospheres).

Cảm biến đo độ rung CV213 Meggitt Vibro-Meter - Vibration sensor Meggitt Vibro-Meter

Features

  • Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
  • Wide frequency response: 10 to 1000 Hz
  • Wide temperature range: −29 to 204 °C
  • Voltage output (20 mV/mm/s)
  • Certified for use in potentially explosive atmospheres
]]> Đại lý phân phối Meggitt Vibro-meter tại Việt Nam - Đại lý Meggitt tại Việt Nam http://tmpinstrument.com/dai-ly-phan-phoi-meggitt-vibrometer-tai-viet-nam-dai-ly-meggitt-tai-viet-nam 2020-03-13 16:31:53 http://tmpinstrument.com/dai-ly-phan-phoi-meggitt-vibrometer-tai-viet-nam-dai-ly-meggitt-tai-viet-nam Đại lý phân phối Meggitt Vibro-meter tại Việt Nam - Đại lý Meggitt tại Việt Nam Readmore

Đại lý nhập khẩu và phân phối thiết bị Meggitt Vibro-Meter tại Việt Nam

Đại lý phân phối Meggitt Vibro-meter tại Việt Nam - Đại lý Meggitt tại Việt Nam

Meggitt Vibro-Meter được thành lập vào năm 1952 là một công ty dẫn đầu thị trường về các giải pháp cảm biến và thiết bị giám sát và các thiết bị thông minh cho các môi trường khắc nghiệt. Hơn 60 năm kinh nghiệm về các giải pháp cảm biến các các sản phẩm của Meggitt Vibro-Meter đã được trang bị trên các dây chuyền sản xuất trên thế giới. Những thiết bị hãng Meggitt Vibro-Meter mà đại lý chúng tôi đang phân phối bao gồm:

Cảm biến đo độ rung Meggitt Vibro-Meter

CV213 velocity transducer

20 mV/mm/s, −29 to 204 °C, 10 to 1000 Hz.

Type : CV213

Designation : Velocity transducer

Ordering number : 110-213-000-012

Matching cable assembly : ED120

CA134 piezoelectric accelerometer

10 pC/g, −253 to 500 °C, up to 6000 Hz.

144-134-000-203

CV214 velocity transducer

20 mV/mm/s, −29 to 121 °C, 10 to 1000 Hz.

Type : CV214

Designation : Velocity transducer

Ordering number : 110-214-000-012

Matching cable assembly : ED121

CA202 piezoelectric accelerometer

100 pC/g, −55 to 260 °C, up to 5000 Hz.

  • 144-202-000-20, 
  • 144-202-000-21
  • 144-202-000-22
  • 144-202-000-23
  • 144-202-000-10
  • 144-202-000-11
  • 144-202-000-12
  • 144-202-000-13

CE134 piezoelectric accelerometer

5 µA/g, −55 to 350 °C, up to 10000 Hz.

  • 444-134-000-405
  • 444-134-000-605
  • 444-134-000-705
  • 444-134-000-715

CE281 piezoelectric accelerometer

10 µA/g, −55 to 260 °C, up to 7000 Hz.

  • 444-281-000-012
  • 444-281-000-112
  • 444-281-000-212

VE210 velocity transducer

50 µA/mm/s or 50 mV/mm/s, −25 to 80 °C, 0.5 to 400 Hz.

  • 410 - 210 - 000 - 012-A1-B1-C1
  • 410 - 210 - 000 - 012-A1-B2-C1
  • 410 - 210 - 000 - 012-A1-B2-C2

CA280 piezoelectric accelerometer

100 pC/g, −55 to 260 °C, up to 10000 Hz.

CE311 piezoelectric accelerometer

50 µA/g, −40 to 125 °C, up to 8000 Hz.

CA306 piezoelectric accelerometer

50 pC/g, −55 to 500 °C, up to 3000 Hz.

CA901 piezoelectric accelerometer

10 pC/g, −54 to 650 °C, up to 3700 Hz.

CE620 piezoelectric accelerometer

Voltage output: 100 or 500 mV/g, −55 to 140 °C, up to 10000 Hz.

CE687 piezoelectric accelerometer

Current output: 4 to 20 mA proportional to 0 to 1, 2, 5, 10 or 20 g, −25 to 90 °C, up to 1000 Hz.

PV660 piezoelectric velocity sensor

Voltage output: 4 mV/mm/s, −25 to 140 °C, up to 4000 Hz.

PV685 piezoelectric velocity sensor

Current output: 4 to 20 mA proportional to 0 to 10, 20, 25, 50 or 100 mm/s, −25 to 90 °C, up to 1000 Hz.

PV686 combined piezoelectric velocity sensor and accelerometer

Current output: 4 to 20 mA proportional to 0 to 10, 20, 25, 50 or 100 mm/s, −25 to 90 °C, up to 1000 Hz.

Voltage output: 100 or 50 mV/g, −25 to 90 °C, up to 10000 Hz.

Cảm biến áp suất Meggitt Vibro-Meter

CP103 piezoelectric pressure transducer

232 pC/bar, −54 to 650 °C, 2 to 10000 Hz.

CP211 piezoelectric pressure transducer

25 pC/bar, −54 to 650 °C, 2 to 15000 Hz.

CP216 piezoelectric pressure transducer

200 pC/bar, −54 to 470 °C, 2 to 15000 Hz.

CP235 piezoelectric pressure transducer

750 pC/bar, −55 to 520 °C, 2 to 10000 Hz.

Cảm biến tiệm cận Meggitt Vibro-Meter

TQ401 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), −40 to 180 °C, Ø5 mm tip, standard-mount.

PA150 probe mounting adaptor with proximity measurement system

Complete probe mounting adaptor with proximity measurement system (TQ412 and IQS452).

PA151 probe mounting adaptor

Removable probe housing and probe adaptor rod.

High-quality, high-reliability removable probe housing and probe adaptor rod to support the external mounting of a TQ412 proximity sensor.

TQ402 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), 4 mV/µm or 1.25 µA/µm (4 mm range), −40 to 180 °C, Ø8.2 mm tip, standard-mount.

TQ403 proximity sensor

1.33 mV/µm or 0.417 µA/µm (12 mm range), −40 to 180 °C, Ø18 mm tip, standard-mount.

PA152 probe mounting adaptor

Probe housing and probe adaptor rod.

High-quality, high-reliability probe housing and probe adaptor rod to support the external mounting of a TQ412 proximity sensor.

PA153 probe mounting adaptor

Probe adaptor rod.

High-quality, high-reliability probe adaptor rod to support the external mounting of a TQ412 proximity sensor.

The PA153 is designed and built for long-term use in harsh environments characterised by high temperatures.

TQ412 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), 4 mV/µm or 1.25 µA/µm (4 mm range), −40 to 180 °C, Ø8.2 mm tip, reverse-mount.

TQ422 proximity sensor

4 mV/µm or 1.25 µA/µm (4 mm range), −25 to 140 °C, Ø12.7 mm tip, standard-mount, 100 bar (tip).

TQ423 proximity sensor

1.33 mV/µm or 0.417 µA/µm (12 mm range), −25 to 140 °C, Ø25 mm tip, standard-mount, 100 bar (tip).

TQ432 proximity sensor

4 mV/µm or 1.25 µA/µm (4 mm range), −25 to 140 °C, Ø12.7 mm tip, reverse-mount, 100 bar (tip).

TQ442 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), 4 mV/µm or 1.25 µA/µm (4 mm range), −40 to 180 °C, Ø8.2 mm tip, 90°-mount.

Card bảo vệ máy móc Meggitt Vibro-Meter

VM600 MPC4 machinery protection card

VM600 MPC4SIL machinery protection card

VM600 IOC4T input/output card for MPC4 cards

VM600 AMC8 analog monitoring card

VM600 IOC8T input/output card for AMC8 card

VM600 IRC4 intelligent relay card

VM600 RLC16 relay card

VM600 CPUM modular CPU card

VM600 IOCN input/output card for CPUM card

VM600 CPUR rack controller and communications interface card

VM600 IOCR input/output card for CPUR card

VM600 CPUR2 rack controller and communications interface card

VM600 IOCR2 input/output card for CPUR2 card

VM600 XMV16 condition monitoring card for vibration

VM600 XMC16 condition monitoring card for combustion

VM600 XMC16 condition monitoring card for combustion

VM600 XIO16T input/output card for XMx16 cards

VM600 ABE040 system rack

Mô đun giám sát Meggitt Vibro-Meter

VibroSmart VSV301 monitoring module

VibroSmart VSB300 terminal base for VSV30x module

VibroSmart VSI010 communications interface module

VibroSmart VSB010 terminal base for VSI010 module

VibroSmart VSF001 serial fieldbus communications adaptor

VibroSmart VSF002 Ethernet fieldbus communications adaptor

VibroSmart VSN010 real-time Ethernet switch

VibroSmart VSA301 buffered output amplifer

Hệ thông giám sát xả thải Meggitt Vibro-Meter

Partial discharge monitoring system

The PDM150 is the most comprehensive and versatile partial discharge (PD) monitoring system on the market. The system includes the necessary hardware and software to monitor, log and report PD activity for systems used in industrial power generation systems and provides important information about the performance of equipment to enable early detection of problems.

Features

  • Standalone monitoring system consisting of power supply module, main CPU module and sensor input module
  • Up to 15 partial discharge sensor inputs, with additional inputs for temperature, pressure, shaft voltages and currents
  • Built-in current signature analysis to detect possible broken rotor bars on induction machines
  • Up to two years of data can be stored internally
  • Easy connection to an industrial plant’s DCS or SCADA system

8 kV power coupling capacitor for partial discharge monitoring system

The CC308, CC316 and CC328 are a series of power coupling capacitors designed to monitor partial discharge (PD).

16 kV power coupling capacitor for partial discharge monitoring system

The CC308, CC316 and CC328 are a series of power coupling capacitors designed to monitor partial discharge (PD).

28 kV power coupling capacitor for partial discharge monitoring system

The CC308, CC316 and CC328 are a series of power coupling capacitors designed to monitor partial discharge (PD).

Resistance temperature detector module for partial discharge monitoring system

The RTD 600 is an interface module that enables existing RTDs (resistance temperature detectors) embedded in the windings of generators and motors to be used as additional partial discharge (PD) sensors to complement power coupling capacitors.

The post Đại lý phân phối Meggitt Vibro-meter tại Việt Nam - Đại lý Meggitt tại Việt Nam appeared first on tmpinstrument.com.

]]> Đại lý nhập khẩu và phân phối thiết bị Meggitt Vibro-Meter tại Việt Nam

Đại lý phân phối Meggitt Vibro-meter tại Việt Nam - Đại lý Meggitt tại Việt Nam

Meggitt Vibro-Meter được thành lập vào năm 1952 là một công ty dẫn đầu thị trường về các giải pháp cảm biến và thiết bị giám sát và các thiết bị thông minh cho các môi trường khắc nghiệt. Hơn 60 năm kinh nghiệm về các giải pháp cảm biến các các sản phẩm của Meggitt Vibro-Meter đã được trang bị trên các dây chuyền sản xuất trên thế giới. Những thiết bị hãng Meggitt Vibro-Meter mà đại lý chúng tôi đang phân phối bao gồm:

Cảm biến đo độ rung Meggitt Vibro-Meter

CV213 velocity transducer

20 mV/mm/s, −29 to 204 °C, 10 to 1000 Hz.

Type : CV213

Designation : Velocity transducer

Ordering number : 110-213-000-012

Matching cable assembly : ED120

CA134 piezoelectric accelerometer

10 pC/g, −253 to 500 °C, up to 6000 Hz.

144-134-000-203

CV214 velocity transducer

20 mV/mm/s, −29 to 121 °C, 10 to 1000 Hz.

Type : CV214

Designation : Velocity transducer

Ordering number : 110-214-000-012

Matching cable assembly : ED121

CA202 piezoelectric accelerometer

100 pC/g, −55 to 260 °C, up to 5000 Hz.

  • 144-202-000-20, 
  • 144-202-000-21
  • 144-202-000-22
  • 144-202-000-23
  • 144-202-000-10
  • 144-202-000-11
  • 144-202-000-12
  • 144-202-000-13

CE134 piezoelectric accelerometer

5 µA/g, −55 to 350 °C, up to 10000 Hz.

  • 444-134-000-405
  • 444-134-000-605
  • 444-134-000-705
  • 444-134-000-715

CE281 piezoelectric accelerometer

10 µA/g, −55 to 260 °C, up to 7000 Hz.

  • 444-281-000-012
  • 444-281-000-112
  • 444-281-000-212

VE210 velocity transducer

50 µA/mm/s or 50 mV/mm/s, −25 to 80 °C, 0.5 to 400 Hz.

  • 410 - 210 - 000 - 012-A1-B1-C1
  • 410 - 210 - 000 - 012-A1-B2-C1
  • 410 - 210 - 000 - 012-A1-B2-C2

CA280 piezoelectric accelerometer

100 pC/g, −55 to 260 °C, up to 10000 Hz.

CE311 piezoelectric accelerometer

50 µA/g, −40 to 125 °C, up to 8000 Hz.

CA306 piezoelectric accelerometer

50 pC/g, −55 to 500 °C, up to 3000 Hz.

CA901 piezoelectric accelerometer

10 pC/g, −54 to 650 °C, up to 3700 Hz.

CE620 piezoelectric accelerometer

Voltage output: 100 or 500 mV/g, −55 to 140 °C, up to 10000 Hz.

CE687 piezoelectric accelerometer

Current output: 4 to 20 mA proportional to 0 to 1, 2, 5, 10 or 20 g, −25 to 90 °C, up to 1000 Hz.

PV660 piezoelectric velocity sensor

Voltage output: 4 mV/mm/s, −25 to 140 °C, up to 4000 Hz.

PV685 piezoelectric velocity sensor

Current output: 4 to 20 mA proportional to 0 to 10, 20, 25, 50 or 100 mm/s, −25 to 90 °C, up to 1000 Hz.

PV686 combined piezoelectric velocity sensor and accelerometer

Current output: 4 to 20 mA proportional to 0 to 10, 20, 25, 50 or 100 mm/s, −25 to 90 °C, up to 1000 Hz.

Voltage output: 100 or 50 mV/g, −25 to 90 °C, up to 10000 Hz.

Cảm biến áp suất Meggitt Vibro-Meter

CP103 piezoelectric pressure transducer

232 pC/bar, −54 to 650 °C, 2 to 10000 Hz.

CP211 piezoelectric pressure transducer

25 pC/bar, −54 to 650 °C, 2 to 15000 Hz.

CP216 piezoelectric pressure transducer

200 pC/bar, −54 to 470 °C, 2 to 15000 Hz.

CP235 piezoelectric pressure transducer

750 pC/bar, −55 to 520 °C, 2 to 10000 Hz.

Cảm biến tiệm cận Meggitt Vibro-Meter

TQ401 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), −40 to 180 °C, Ø5 mm tip, standard-mount.

PA150 probe mounting adaptor with proximity measurement system

Complete probe mounting adaptor with proximity measurement system (TQ412 and IQS452).

PA151 probe mounting adaptor

Removable probe housing and probe adaptor rod.

High-quality, high-reliability removable probe housing and probe adaptor rod to support the external mounting of a TQ412 proximity sensor.

TQ402 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), 4 mV/µm or 1.25 µA/µm (4 mm range), −40 to 180 °C, Ø8.2 mm tip, standard-mount.

TQ403 proximity sensor

1.33 mV/µm or 0.417 µA/µm (12 mm range), −40 to 180 °C, Ø18 mm tip, standard-mount.

PA152 probe mounting adaptor

Probe housing and probe adaptor rod.

High-quality, high-reliability probe housing and probe adaptor rod to support the external mounting of a TQ412 proximity sensor.

PA153 probe mounting adaptor

Probe adaptor rod.

High-quality, high-reliability probe adaptor rod to support the external mounting of a TQ412 proximity sensor.

The PA153 is designed and built for long-term use in harsh environments characterised by high temperatures.

TQ412 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), 4 mV/µm or 1.25 µA/µm (4 mm range), −40 to 180 °C, Ø8.2 mm tip, reverse-mount.

TQ422 proximity sensor

4 mV/µm or 1.25 µA/µm (4 mm range), −25 to 140 °C, Ø12.7 mm tip, standard-mount, 100 bar (tip).

TQ423 proximity sensor

1.33 mV/µm or 0.417 µA/µm (12 mm range), −25 to 140 °C, Ø25 mm tip, standard-mount, 100 bar (tip).

TQ432 proximity sensor

4 mV/µm or 1.25 µA/µm (4 mm range), −25 to 140 °C, Ø12.7 mm tip, reverse-mount, 100 bar (tip).

TQ442 proximity sensor

8 mV/µm or 2.5 µA/µm (2 mm range), 4 mV/µm or 1.25 µA/µm (4 mm range), −40 to 180 °C, Ø8.2 mm tip, 90°-mount.

Card bảo vệ máy móc Meggitt Vibro-Meter

VM600 MPC4 machinery protection card

VM600 MPC4SIL machinery protection card

VM600 IOC4T input/output card for MPC4 cards

VM600 AMC8 analog monitoring card

VM600 IOC8T input/output card for AMC8 card

VM600 IRC4 intelligent relay card

VM600 RLC16 relay card

VM600 CPUM modular CPU card

VM600 IOCN input/output card for CPUM card

VM600 CPUR rack controller and communications interface card

VM600 IOCR input/output card for CPUR card

VM600 CPUR2 rack controller and communications interface card

VM600 IOCR2 input/output card for CPUR2 card

VM600 XMV16 condition monitoring card for vibration

VM600 XMC16 condition monitoring card for combustion

VM600 XMC16 condition monitoring card for combustion

VM600 XIO16T input/output card for XMx16 cards

VM600 ABE040 system rack

Mô đun giám sát Meggitt Vibro-Meter

VibroSmart VSV301 monitoring module

VibroSmart VSB300 terminal base for VSV30x module

VibroSmart VSI010 communications interface module

VibroSmart VSB010 terminal base for VSI010 module

VibroSmart VSF001 serial fieldbus communications adaptor

VibroSmart VSF002 Ethernet fieldbus communications adaptor

VibroSmart VSN010 real-time Ethernet switch

VibroSmart VSA301 buffered output amplifer

Hệ thông giám sát xả thải Meggitt Vibro-Meter

Partial discharge monitoring system

The PDM150 is the most comprehensive and versatile partial discharge (PD) monitoring system on the market. The system includes the necessary hardware and software to monitor, log and report PD activity for systems used in industrial power generation systems and provides important information about the performance of equipment to enable early detection of problems.

Features

  • Standalone monitoring system consisting of power supply module, main CPU module and sensor input module
  • Up to 15 partial discharge sensor inputs, with additional inputs for temperature, pressure, shaft voltages and currents
  • Built-in current signature analysis to detect possible broken rotor bars on induction machines
  • Up to two years of data can be stored internally
  • Easy connection to an industrial plant’s DCS or SCADA system

8 kV power coupling capacitor for partial discharge monitoring system

The CC308, CC316 and CC328 are a series of power coupling capacitors designed to monitor partial discharge (PD).

16 kV power coupling capacitor for partial discharge monitoring system

The CC308, CC316 and CC328 are a series of power coupling capacitors designed to monitor partial discharge (PD).

28 kV power coupling capacitor for partial discharge monitoring system

The CC308, CC316 and CC328 are a series of power coupling capacitors designed to monitor partial discharge (PD).

Resistance temperature detector module for partial discharge monitoring system

The RTD 600 is an interface module that enables existing RTDs (resistance temperature detectors) embedded in the windings of generators and motors to be used as additional partial discharge (PD) sensors to complement power coupling capacitors.

]]> Cảm biến đo độ rung động cơ CE620 Meggitt Vibro-meter | Vibration Sensor Meggitt Vibro-Meter http://tmpinstrument.com/cam-bien-do-do-rung-dong-co-ce620-meggitt-vibrometer-vibration-sensor-meggitt-vibrometer 2020-03-13 14:06:59 http://tmpinstrument.com/cam-bien-do-do-rung-dong-co-ce620-meggitt-vibrometer-vibration-sensor-meggitt-vibrometer Cảm biến đo độ rung động cơ CE620 Meggitt Vibro-meter | Vibration Sensor Meggitt Vibro-Meter Readmore

 Vibration Sensor Meggitt Vibro-Meter

Cảm biến rung Meggitt Vibro-Meter

Type: CE620 Meggitt Vibro-Meter

DESCRIPTION

The CE620 piezoelectric accelerometer with integrated electronics from Meggitt’s Vibro-Meter® product line is a general-purpose vibration sensor designed for the monitoring and protection of machinery in harsh industrial environments.

It is an industry standard IEPE (integrated electronics piezo electric) vibration sensor that requires a constant current power supply and provides a dynamic vibration output signal (AC voltage) on a bias level (DC voltage). The CE620 is available with a sensitivity of either 100 or 500 mV/g.

Cảm biến đo độ rung động cơ CE620 Meggitt Vibro-meter | Vibration Sensor Meggitt Vibro-Meter

FEATURES

  • From the Vibro-Meter® product line
  • Voltage output signal: 100 or 500 mV/g
  • Frequency response: 2 Hz to 10 kHz
  • Temperature range: −55 to 140°C
  • Ground isolated from case
  • Isolated electronics for reduced noise and increased bias voltage stability
  • Available in standard versions and Ex versions certified for use in potentially explosive atmospheres

The post Cảm biến đo độ rung động cơ CE620 Meggitt Vibro-meter | Vibration Sensor Meggitt Vibro-Meter appeared first on tmpinstrument.com.

]]>  Vibration Sensor Meggitt Vibro-Meter

Cảm biến rung Meggitt Vibro-Meter

Type: CE620 Meggitt Vibro-Meter

DESCRIPTION

The CE620 piezoelectric accelerometer with integrated electronics from Meggitt’s Vibro-Meter® product line is a general-purpose vibration sensor designed for the monitoring and protection of machinery in harsh industrial environments.

It is an industry standard IEPE (integrated electronics piezo electric) vibration sensor that requires a constant current power supply and provides a dynamic vibration output signal (AC voltage) on a bias level (DC voltage). The CE620 is available with a sensitivity of either 100 or 500 mV/g.

Cảm biến đo độ rung động cơ CE620 Meggitt Vibro-meter | Vibration Sensor Meggitt Vibro-Meter

FEATURES

  • From the Vibro-Meter® product line
  • Voltage output signal: 100 or 500 mV/g
  • Frequency response: 2 Hz to 10 kHz
  • Temperature range: −55 to 140°C
  • Ground isolated from case
  • Isolated electronics for reduced noise and increased bias voltage stability
  • Available in standard versions and Ex versions certified for use in potentially explosive atmospheres
]]> Cảm biến đo độ rung động cơ CE 680 M511 Meggitt Vibro-meter http://tmpinstrument.com/cam-bien-do-do-rung-dong-co-ce-680-m511-meggitt-vibrometer 2020-03-13 13:49:18 http://tmpinstrument.com/cam-bien-do-do-rung-dong-co-ce-680-m511-meggitt-vibrometer
  • MFR: S3950
  • SER: 6493 
  • PNR: 444-680-000-511 
  • DMF: 082013
Readmore

Vibration sensor MEGGITT Vibro-Meter

Cảm biến đo độ rung Motor

Type: CE 680 M511

DESCRIPTION

The CE 680 M511 is an all-purpose vibration sensor designed for use in harsh industrial machinery environments. It uses the industry standard 2-wire voltage transmission technique with a constant current supply. The output signal has a sensitivity of 100 mV/g.

Cảm biến đo độ rung động cơ CE 680 M511 Meggitt Vibro-meter

FEATURES

  • Designed for medium temperature industrial applications (-50°C to +120°C)
  • Frequency response 1 Hz to 9 kHz: ±10% 0.5 Hz to 14 kHz: -3 dB
  • Shear mode operation, therefore no output due to thermal transients
  • Hermetically sealed for harsh environments
  • Case insulated, internally shielded
  • ESD protection

The post Cảm biến đo độ rung động cơ CE 680 M511 Meggitt Vibro-meter appeared first on tmpinstrument.com.

]]> Vibration sensor MEGGITT Vibro-Meter

Cảm biến đo độ rung Motor

Type: CE 680 M511

DESCRIPTION

The CE 680 M511 is an all-purpose vibration sensor designed for use in harsh industrial machinery environments. It uses the industry standard 2-wire voltage transmission technique with a constant current supply. The output signal has a sensitivity of 100 mV/g.

Cảm biến đo độ rung động cơ CE 680 M511 Meggitt Vibro-meter

FEATURES

  • Designed for medium temperature industrial applications (-50°C to +120°C)
  • Frequency response 1 Hz to 9 kHz: ±10% 0.5 Hz to 14 kHz: -3 dB
  • Shear mode operation, therefore no output due to thermal transients
  • Hermetically sealed for harsh environments
  • Case insulated, internally shielded
  • ESD protection
]]>