5550 & 5550G Mechanical Vibration Switches

Metrix 5550 Vibration switch

Metrix mechanical vibration switch is designed to meet all requirements in a single, affordable package. It provides vibration protection for low to medium speed machinery. An inertia sensitive mechanism activates a snap-action switch with SPDT output contacts if the vibration exceeds an adjustable setpoint. The 5550 mechanical vibration switch contacts can be used to activate an alarm or initiate equipment shutdown. The housing is weatherproof with an optional hazardous area rating. Electrical (remote) reset with start-up time delay and a second set of SPDT output contacts to accommodate DPDT needs (e.g. separate trip and trip light circuits) are available.

The 5550G uses identical internal mechanisms, but carries an IECEX rating ideal for IIC gas group applications.

Product Aprox. Weight: 1.8 kg (4 lbs)

Part Number:

Metrix 5550-111-011 Vibration switch, Metrix 5550-123-01Vibration switch; Metrix 5550-113-010 Vibration switch; Metrix 5550-421-041 Vibration switch; Metrix 5550-221-010 Vibration switch; Metrix 5550-421-381 Vibration switch; Metrix 5550-121-02 Vibration switch; Vibration Switch 5550-423-240 Vibration switch; Metrix 5550-021-011 Vibration switch;  Metrix 5550-423-040 Vibration switch; Metrix 5550-323-240 Vibration switch; Metrix 5550-121-210 Vibration switch; Metrix5550-411 -361 Vibration switch

The post Metrix Model 5550 Vibration Switch - Đại lý phân phối thiết bị hãng Metrix tại Việt Nam appeared first on tmpinstrument.com.

Đại lý Metrix Vibration tại Việt Nam

Metrix MX2034 4-20 mA Transmitter with Dynamic Signal Output

Metrix* MX2034 is configurable for radial vibration, axial position or speed measurements. It combines the performance of a fully API 670-compliant eddy-current proximity measurement system with the flexibility of digital configurability. For the first time, users can configure their transmitter system in the field using a custom field-generated curve as well as factory pre-configured calibrations for over 20 target materials, a variety of probe tip diameters, manufacturers, extension cable lengths, and linear ranges.

With the release of the Digital Proximity System DPS1.35 and its associated software, MX2034 is even more powerful and flexible for user applications. With a single transmitter, users can switch probe type, change system length, alter target material at will in field. MX2034 is capable of eliminating the cross-talk between two adjacently installed proximity probes, the dynamic output signal measured at the BNC can be configured for positive or negative polarity depending upon the application, and transient electrical spikes can be suppressed in the system. With the 4-pin connector, users of the MX2034 can send the dynamic signal output to a vibration monitoring system up to 100ft away. There are many other advanced features of the MX2034 that customers can take advantage of to optimize the value of their transmitter system. Product Aprox Weight: 247g (8.7 oz). 

Vibration Mode:

• Full scale vibration range

• Spike suppression

• 4-20mA decay rate

Position Mode:

• Full scale linear range
• 4-20mA direction in upscale or downscale

Speed Mode:

• Full scale RPM (10 - 100,000)
• Keyway numbers
• Threshold voltage
• Hysteresis 

RELATED PRODUCTS
MX2033 Driver	MX8030 Probe	MX8031 Extension Cable
Static Calibrator	  Dynamic Signal Checker	  5497PM Probe Holder

The post Transmitter MX2034 | Digital Proximity System | Đại lý Metrix tại Việt Nam appeared first on tmpinstrument.com.

Đại lý Metrix Vibration tại Việt Nam

MX2033 3-Wire Driver | MX2033-01-06-20-05

Dynamic Voltage Output (mV/mm or mV/mil)

Key Features:

• Digitally configurable using included software to change to any of the available options for MX2033 drivers and MX2034 transmitters
• Generate a custom in the field by recording the gap voltage at 10 mil increments and entering it into the included software
• A custom linearization table is generated and loaded into the device
• Full API 670 Compliance
• Reduced requirements for spare parts by allowing a single type of driver or transmitter to be field-configured for a wide range of probe types, cable lengths, and target materials
• Wide range of interchangeability between Metrix MX8030 and MX 2030 probes, MX8031 and MX2031 extension cables, all fully interchangeable with BN 3300 and 3300XL probe sytems
• Support for older probe systems

RELATED PRODUCTS
MX2034 Transmitter	MX8030 Probe	MX8031 Extension Cable
Static Calibrator	  Dynamic Signal Checker	  5497PM Probe Holder

The post MX2033 3-Wire Driver - Digital Proximity System - Đại lý Metrix Vibration tại Việt Nam appeared first on tmpinstrument.com.