Nhà cung cấp thiết bị hãng Badger Meter tại Việt Nam

Badger Meter có trụ sở chính tại Mỹ (USA) là một công ty chuyên sản xuất các dòng thiết bị đo lường và kiểm soát dòng chảy.

Tăng Minh Phát hiện đang là đối tác chiến lược của hãng Badger Meter tại Việt Nam. Hay liên hệ với chúng tôi để được hỗ trợ giá tốt nhất.

Các sản phẩm hãng Badger Meter mà chúng tôi đang phân phối bao gồm:

Mechanical Flow Meters

Turbine Meters

Blancett Turbine Flow Meters

• Liquid measurement turbine flow meters:
• Pipe size: 1/2…10 in. (13…254 mm)
• Threaded, flange, wafer and sanitary (3-A) connections
• Operating pressure: up to 5000 psig (344 barg)
• Operating temperature: up to 450º F (232º C) 
• Flow range: 0.6…5000 gpm (11.36…18,927 lpm)
• Accuracy: up to ± 1% of reading

Gas turbine flow meters:

• Pipe size: 2 in. (51 mm)
• Wafer mounting provides quick installation and requires minimal space
• Operating pressure: up to 2200 psig (15.3 MPa)
• Operating temperature: up to 330º F (165º C)
• Flow range: 7…350 acfm (12…595 m3 /hr)
• Accuracy: up to ± 2% of reading

Vision Turbine Flow Meters

Turbine meters: 

• Pipe size: 1/4…3/4 in. (7…19 mm)
• Flow range: 0.026…17.17 gpm (0.1…65 lpm )
• Accuracy: up to ± 3% of reading
• Trogamid operating pressure: up to 360 psig (25 barg)
• Brass operating pressure: up to 2600 psig (179 barg)
• Operating temperature: –4…100° F (–20…212° C)
• Mountable in any orientation
• Bi-directional flow measurement
• Frequency output

Cox Precision Turbine Flow Meter

Exact dual rotor meters: 

• Pipe size: 1/4…4 in. (6.35…101.6 mm)
• low range: 0.025…1500 gpm (0.095…5678 lpm)
• Linearity: ± 0.1% of reading, with a flow processor
• Absolute accuracy: ± 0.10% of reading
• Repeatability: ± 0.02% of reading

Precision single rotor meters:

• Pipe size: 1/4…2 in. (6.35…50.8 mm)
• Flow range: 0.05…310 gpm (0.19…1173.5 lpm)
• Repeatability: ± 0.02% of reading
• Linearity: ± 0.50% (± 0.1% with flow processor)
• Frequency output: 1200…1500 Hz
• Response time: 2…3 ms (at 1.2 cSt) Precision gas meters:
• Pipe size: 1/4…2 in. (6.35…50.8 mm) • Flow range: 0.40…250 acfm (0.07…424.75 m3 /hr)
• Repeatability: ± 0.25% of reading
• Response time: 20…30 ms or better Precision LoFlo turbine flow meters:
• Pipe size: 3/8 in. (9.5 mm)
• Flow range: 0.006…1.25 gpm (0.024…4.73 lpm)
• Repeatability: ± 0.25% of reading
• Response time: 20…30 ms or better (at 1.2 cSt)

Industrial & Recordall Turbine Flow Meters

Specifications:

• Pipe size: 2…6 in. (50.8…152.4 mm)
• Flow range: 8…2000 gpm (3.8…7570 lpm) 
• Operating pressure: up to 150 psi
• Accuracy: ± 1.5%
• Repeatability: ± 0.25%
• Temperature range: –30…250° F (–34.4…121.1° C)

Industrial Oval Gear (IOG) Flow Meters

Displays, transmitters and registers:

• Meter-mount, local display registers with choice of no output, scalable pulse output, quadrature/dual pulse output or 4…20 mA output
• Meter-mount, non-scaled transmitters with either a single-reed switch or dual-reed switch
• Meter or remote-mount large display options include models with choice of 4…20 mA output, Modbus RTU or BACnet MSTP

Oval gear meters:

• Pipe size: 1/4…3 in. (6…76 mm)
• Flow range: 0.07…185 gpm (0.26…700 lpm)
• High accuracy and repeatability • Operating pressure: up to 740 psi
• Liquid viscosity: 5…1000 cP
• Construction: choice of aluminum or 316L stainless steel
• Mountable in any orientation

Recordall Nutating Disc Flow Meters

Features:

Wide range of compatible accessories Performance:

• Accuracy: ± 1.5%
• Repeatability: ± 0.5%
• Maximum operating pressure: 150 psi
• Maximum operating temperature: Plastic housing: 100° F (37.78° C) Bronze housing: 120° F (48.89° C)

Hedland Variable Area Flow Meters

Variable area flow meters with visual indicator:

• Pipe size: 1/4…3 in. (6.35…76.2 mm)
• Accuracy: up to ± 2% of full scale
• Operating pressure: up to 6000 psig (414 barg)
• Operating temperature: up to 500º F (260º C)
• Also available: ± 5% full scale accuracy model from 1/2…3 in. (12.7…76.2 mm) for systems with lower operating pressure and temperature ratings

Variable area flow meters with outputs and digital display:

• Pipe size: 1/4…1.5 in. (6.35…38.1 mm)
• Accuracy: up to ± 2% of full scale
• Operating pressure: up to 6000 psig (414 barg)
• Operating temperature: up to 240º F (116º C)
• Analog outputs: 4…20 mA, 0…5V DC or 0…10V DC
• Digital display of flow rate and total
• Programmable keypad offers selectable engineering units and in-field linearization

Flo-tech Hydraulic Diagnostic Products

Inline hydraulic turbine flow sensors:

• Flow range: up to 350 gpm (1324 lpm)
• Accuracy: ± 1% of full scale
• Operating pressure: up to 6000 psig (414 barg)
• Operating temperature: up to 300º F (149º C)
• Frequency pulse, 4…20 mA and voltage outputs

Data Industrial Impeller Flow Meters

Inline Flow Meters:

• Pipe size: 1/2…4 in. (12.7 to 101.6 mm)
• Accuracy: up to ± 2% of full scale
• Features available:
• Built-in energy meter
• Construction for use in super clean water
• Design for below-grade usage
• Point-to-point wireless

Preso Diff erential Pressure Flow Meters

• Fluid viscosity: up to 3000 cP
• Reynolds Number: as low as 300
• Calibrated accuracy: ± 0.5% of reading
• Low pressure losses
• Maintenance free (no moving parts)
• Suitable for abrasive slurries, viscous or dirty fluids such as bitumen or coal tar
• Pipe size: 1/2…48 in. (13…1219 mm)
• Custom designs available

ModMAG Electromagnetic Flow Meters

• Non-intrusive, completely open flow tube design
• Pipe size: 1/4…54 in. (DN6…2000), depending upon model
• Accuracy: up to ± 0.2% ± 1 mm/s
• Corrosion-resistant liners for long life
• Remote or meter mounted amplifier
• LCD display
• SCADA-ready outputs
• NEMA 4X/6P options

NSF approved Models available include:

• M1000 for basic general area environments or on-truck applications
• M2000 for general area environments
• M3000 for Class 1, Div. 2 environments
• M4000 for Class 1, Div. 1 environments
• M5000 battery powered for locations without power
• M7600 for basic batching applications

Coriolis Mass Flow Meters

• Specifications:
•  Pipe size: 1/16...3 in. (1.6...76.2 mm)
• Connection size: 1/4...3 in., DN15-80

Accuracy:

• Liquids: up to ± 0.1% of flow rate
• Density: up to ± 0.0005 g/cm3
• Zero stability: up to ± 0.025% of full scale
• Repeatability: up to ± 0.05% of flow rate
• Process temperature range: –40…392° F (–40…200° C)
• General area or hazardous location

Dynasonics Ultrasonic Flow Meters

Transit time ultrasonic flow meters:

•  Pipe size: 1/2 in. (12 mm) and larger
• Accuracy: up to ± 0.5% of reading (± 1.5% of reading for inline model)
• Variety of output options: 4…20 mA, frequency pulse and control relay
• Options include BACnet MSTP, Modbus RTU, EtherNet/IP, Modbus TCP/IP, BACnet/IP, energy monitoring and data logging

Doppler ultrasonic flow meters:

• Pipe size: 1/4 in. (6 mm) and larger
• Accuracy: up to ± 1% of full scale
•  Fluid velocity: up to 30 feet (9 meters) per second Portable transit time/Doppler hybrid ultrasonic flow meters:
• Pipe size: 1/2 in. (12 mm) and larger
• Accuracy: ± 1% of reading
• Measures flow and energy
• Full-color display, graphing capabilities, advanced touch-screen interface and wizard-based configuration tools
• 1 GB internal data logging

• Optional dual-mode pipe wall thickness sensor

Vortex Flow Meters

Corrosion Resistant Inline: 

• Liquid Measurement • Pipe size: 1/4…3 in.
• Accuracy: up to ± 1% of reading
• Repeatability: up to ± 0.25% of actual flow
• Operating pressure: up to 150 psig (10.3 barg)
• Operating temperature: up to 203° F (95° C)
• Available material options include PVC, PVDF, CPVC and polypropylene

Stainless Steel Insertion:

• Liquid, compressed air and saturated steam measurement
• Pipe size: 2…36 in.
• Accuracy: up to ± 1% of reading
• Repeatability: up to ± 0.25% of reading
• Operating pressure: up to 1000 psig (68.9 barg)
• Operating temperature: up to 400º F (204º C)
• Reduced noise interference with dual piezoelectric sensors and filtering

Research Control Valves & Positioners

Small control valves:

•  RCV, 9000 and 9100 control valves
• Pipe size: 1/4…2 in.
• CV: 0.0000018…70.0
• Multiple trim sizes per valve size
•  Precise accurate control
•  Operating temperature: –450…1800° F (–267.78…982.22° C)
•  Operating pressures: full vacuum to 60,000 psi
• Materials: 316 SST, Hastelloy, Monel, Inconel, Tantalum and other exotics
• Actuators:
• Air-to-open 
• Air-to-close
• Integral top-mounted positioners
•  Stainless steel option available on most models

Electronic actuator SEVA:

• Fast response
• Universal Input Power (24V DC, 115V - 230 VAC)
• Protocols: Ethernet/IP, Modbus RTU, Modbus TCP/IP and Hart
• Manual override • Standard 4…20 mA; Configurable 0…5/10V DC

Positioners:

• Easy two-step commissioning
• Auto-start with self-calibration
• 4…20 mA, HART®, FOUNDATION™ fieldbus H1 or Profibus® PA communications
•  IP66, NEMA 4X and XP enclosures
•  SIL3 certification