Đại lý phân phối hãng STI Vibration tại Việt Nam

Distributor of STI Vibration in Vietnam

CMCP785A STI Vibration | Cảm biến gia tốc STI Vibration

The CMCP785A Side Exit General Purpose Accelerometer is the most common choice when it comes to monitoring different types of rotating equipment. The CMCP785A's side exit requires less clearance and accommodates a flush installation. The sensor is lightweight and can be use for route based or permanent mount applications. The sensor is designed so that cross wiring will not harm the internal components and provides protection against ground loops. The CMCP785A is waterproof and can be hosed down or submersed when using the proper extension cable such as the CMCP602 series. Additional sensitivities such as 10 mV/g, 30 mV/g, 50 mV/g, 250 mV/g and 500 mV/g are also available in the same sensor package and can be ordered by adding the sensitivity after the base part number. Contact STI for more details.

Features

• General Purpose Side Entry Accelerometer
• 100 mV/g ±10% Sensitivity
• 284 °F (140 °C) Maximum Temperature
• ±80 g Dynamic Range
• 2 Pin MS 5015 Connector or choice of M12 Connector or Integral Cable
• Class 1 Division 2 Approved
• Class 1 Division 1 Approved with IS Barrier or Isolator
• ¼”-28 UNF or M8x1.25 Captive Mounting Bolt
• Sealed to IP68
• Lifetime Warranty

Technical Performance

• Mounted Base Resonance: 27 kHz (nominal)
• Sensitivity: 100mV/g ±10% Nominal 80Hz at 22⁰C
• Frequency Response: 1.0 Hz to 10 kHz ±10% (60cpm to 600kcpm)
• 0.8 Hz to 12 kHz ±3dB (48cpm to 720kcpm)
• Isolation: Base Isolated
• Measurement Range: ±80 g
• Transverse Sensitivity: Less than 5%

Electrical

• Electrical Noise: 0.1mg max
• Current Range: 0.5mA to 8mA
• Bias Voltage: 10-12 Vdc
• Settling Time: 1.5 Seconds
• Output Impedance: 200 Ohms max.
• Case Isolation: >108 Ohms at 500 Volts

Environmental

• Operating Temperature Range: -67 to 284°F (-55 to 140⁰C)
• Sealing: IP68
• Maximum Shock: 5000 g
• Approvals: CE Approved
• CSA/UL Class 1 Division 2, Groups B, C and D

Mechanical

• Case Material: Stainless Steel
• Sensing Element: PZT/Compression
• Mounting Torque: 5.9ft. lbs (8Nm)
• Weight: 6.5 Oz (185 grams)
• Mating Connector: 2 Pin MS 5015
• Mounting Thread:
• CMCP785A: 1/4”-28 UNF Captive Bolt Supplied with Sensor
• CMCP785A-M8: M8x1.25 Captive Bolt Supplied with Sensor